{"product_id":"aam10-s1-yokogawa-analog-input-module-new-original-stock","title":"AAM10-S1 YOKOGAWA Analog Input Module New \u0026 Original Stock","description":"\u003cp\u003eConfigured for high-density signal acquisition in CENTUM series control platforms, the \u003cstrong\u003eYOKOGAWA AAM10-S1\u003c\/strong\u003e (\u003cstrong\u003eAAM10-S1\u003c\/strong\u003e Analog Input Module) provides direct physical signal conversion from field instrumentation to the system backplane bus.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eAAM10-S1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eYOKOGAWA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eJapan\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.63 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e5.1 cm x 25.4 cm x 11.4 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e0 to 50 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003e5.0 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChannel Capacity\u003c\/td\u003e\n\u003ctd\u003eMulti-channel analog acquisition\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eChannel-to-Channel Isolation and HART Connectivity\u003c\/h3\u003e\n\u003cp\u003eThe module architecture incorporates active galvanic isolation on each input channel to prevent common-mode noise propagation and ground loop formation between disparate process loops. Integration with 4-20 mA HART loop protocol standards is supported, enabling bi-directional communication between field sensors and the system controller. The input stage utilizes precision shunt resistors for current measurement and high-impedance circuitry for voltage detection, maintaining signal linearity across the full measurement scale.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: Does the AAM10-S1 support hot-swap functionality during system operation?\u003c\/p\u003e\n\u003cp\u003eA: Yes, the hardware supports insertion and removal while the backplane is energized; however, ensure the corresponding terminal block is configured for high-availability operation to prevent signal transients during the transition.\u003c\/p\u003e\n\u003cp\u003eQ: How should the module be configured for different input signal types?\u003c\/p\u003e\n\u003cp\u003eA: Input mode selection is executed via software parameters within the engineering station; verify that the terminal board wiring matches the selected input type before applying power to the field loops.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eVerify that the physical slot on the backplane is free of debris before inserting the module to ensure proper connector seating and electrical continuity.\u003c\/li\u003e\n\u003cli\u003eRoute field signal wiring through dedicated cable ducts separate from AC power lines and high-current motor cables to minimize electromagnetic interference.\u003c\/li\u003e\n\u003cli\u003eTerminate all cable shields to the cabinet ground bar at a single common point to achieve optimal common-mode noise rejection.\u003c\/li\u003e\n\u003cli\u003ePerform a visual check of the diagnostic LEDs after power-up to confirm the module has passed internal self-tests and established communication with the controller.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Yokogawa","offers":[{"title":"Default Title","offer_id":49149526016252,"sku":"AAM10 S1","price":99.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/9983\/1292\/files\/AAM111.jpg?v=1780277240","url":"https:\/\/www.electronicplc.com\/ar\/products\/aam10-s1-yokogawa-analog-input-module-new-original-stock","provider":"Electronic PLC","version":"1.0","type":"link"}