{"product_id":"aip171-s2-yokogawa-transceiver-control-module","title":"AIP171\/S2 YOKOGAWA Transceiver Control Module","description":"\u003cp\u003eConfigured for multi-protocol data exchange in process control architectures, the \u003cstrong\u003eYOKOGAWA AIP171 S2\u003c\/strong\u003e (\u003cstrong\u003eAIP171\u003c\/strong\u003e Transceiver Control Module) provides direct physical and electrical execution of serial and Ethernet communication tasks.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eAIP171 S2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eYOKOGAWA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eJanpan\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.2 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e3.2 cm x 12 cm x 13 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e0 to 50 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003e20 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCommunication Interfaces\u003c\/td\u003e\n\u003ctd\u003eRS-485, RS-232, Ethernet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupported Protocols\u003c\/td\u003e\n\u003ctd\u003eTCP\/IP, SPI, I2C, UART\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrequency Range\u003c\/td\u003e\n\u003ctd\u003e100 MHz to 6 GHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eChannel-to-Channel Isolation and Signal Processing\u003c\/h3\u003e\n\u003cp\u003eThe AIP171 S2 design utilizes channel-to-channel isolation to decouple sensitive transceiver circuitry from high-energy backplane transients. This isolation architecture prevents ground potential shifts from propagating across the serial interface when connected to external devices. In multi-protocol environments, the module performs real-time signal conditioning to maintain data integrity across TCP\/IP and UART segments, ensuring that communication timing remains consistent with the deterministic requirements of the host control station.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: Does the module support hot-swapping under full backplane load?\u003c\/p\u003e\n\u003cp\u003eA: No. The AIP171 S2 is not hot-swap compatible. Power must be removed from the module and the associated backplane segment before physical extraction or insertion to prevent damage to the communication controllers.\u003c\/p\u003e\n\u003cp\u003eQ: How should the shield be terminated for the RS-485 interface to maintain signal integrity?\u003c\/p\u003e\n\u003cp\u003eA: The shield must be connected to a clean functional earth at one point only to avoid ground loops. Ensure that the impedance of the termination matches the cable characteristics for the specified transmission frequency to mitigate signal reflections.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMount the module vertically on a DIN rail to allow for optimal convective cooling across the 3.2 cm x 12 cm x 13 cm chassis.\u003c\/li\u003e\n\u003cli\u003eEnsure all Ethernet and serial cables are routed through grounded metallic conduit or shielded trays, maintaining a minimum 30 cm separation from high-voltage AC power lines.\u003c\/li\u003e\n\u003cli\u003eVerify that the 24 VDC power connection is secured with appropriate ferrules to prevent intermittent voltage drops that could disrupt high-frequency transceiver performance.\u003c\/li\u003e\n\u003cli\u003eCheck that all connector pins are free of oxidation before engagement; ensure that connector retention screws are fully tightened to maintain contact pressure during high-vibration operations.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Yokogawa","offers":[{"title":"Default Title","offer_id":49143192912124,"sku":"AIP171\/S2","price":99.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/9983\/1292\/files\/AIP171S2.jpg?v=1780019920","url":"https:\/\/www.electronicplc.com\/ar\/products\/aip171-s2-yokogawa-transceiver-control-module","provider":"Electronic PLC","version":"1.0","type":"link"}