{"product_id":"amm11-yokogawa-magnetic-flow-converter-new-original-stock","title":"AMM11 YOKOGAWA Magnetic Flow Converter | New \u0026 Original Stock","description":"\u003cp\u003eConfigured for electromagnetic flow rate signal conditioning in process control platforms, the \u003cstrong\u003eYOKOGAWA AMM11\u003c\/strong\u003e (\u003cstrong\u003eAMM11\u003c\/strong\u003e Magnetic Flow Converter) provides direct physical signal processing for conductive fluid monitoring. This hardware component serves as the signal conversion interface utilized to interpret induced electromotive force from magnetic flow tubes across industrial automation networks.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eAMM11\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eYOKOGAWA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eJapan\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.5 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e150 mm x 100 mm x 120 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003eIndustrial standard range\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003eNot specified\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction\u003c\/td\u003e\n\u003ctd\u003eMagnetic Flow Conversion\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eProcess Control and Signal Processing\u003c\/h3\u003e\n\u003cp\u003eThe AMM11 operates by processing the voltage potential generated by conductive fluids passing through a magnetic field. To ensure accurate flow measurement, the converter utilizes internal excitation circuitry to maintain a stable magnetic field within the flow tube. Precise calibration of the input signal is required to compensate for fluid conductivity variations and potential cross-talk suppression between the signal electrodes. The device interfaces with standard 4-20 mA HART loop protocol configurations, ensuring compatibility with downstream DCS or SCADA systems for real-time monitoring and flow totalization.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions (FAQ)\u003c\/h3\u003e\n\u003cp\u003eQ: What is the minimum fluid conductivity required for accurate measurement by the AMM11?\u003c\/p\u003e\n\u003cp\u003eA: The AMM11 requires a minimum fluid conductivity typically in the range of 5 microsiemens per centimeter (uS\/cm), depending on the connected sensor tube size and cable length. Verify that the process fluid meets this threshold to prevent signal loss.\u003c\/p\u003e\n\u003cp\u003eQ: Is the AMM11 compatible with existing analog input modules?\u003c\/p\u003e\n\u003cp\u003eA: Yes, the AMM11 provides standard industrial outputs. Ensure the downstream analog input card is configured for the appropriate range (e.g., 4-20 mA) and that the loop impedance does not exceed the converter's drive capacity.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Stability:\u003c\/strong\u003e Secure the AMM11 to a vibration-free panel or wall location. Given the 0.5 kg mass, ensure that the mounting hardware is tightened to prevent mechanical resonance, which can introduce noise into the low-level electrode signals.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGrounding Requirements:\u003c\/strong\u003e Effective grounding is necessary to maintain signal integrity. Connect the converter housing to a verified system ground to prevent common-mode electrical noise from affecting the flow rate calculation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShielding and Cabling:\u003c\/strong\u003e Use shielded cable for the connection between the flow tube and the AMM11. Ensure the shield is terminated properly at the converter side to minimize electromagnetic interference (EMI).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnvironment:\u003c\/strong\u003e While the unit is designed for industrial use, avoid exposure to temperatures beyond the manufacturer-rated limits or environments with excessive acidic or corrosive vapors that could penetrate the enclosure seals.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Yokogawa","offers":[{"title":"Default Title","offer_id":49181357441276,"sku":"AMM11","price":99.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/9983\/1292\/files\/AMM11T.jpg?v=1781055595","url":"https:\/\/www.electronicplc.com\/ar\/products\/amm11-yokogawa-magnetic-flow-converter-new-original-stock","provider":"Electronic PLC","version":"1.0","type":"link"}