{"product_id":"bently-nevada-330880-28-15-035-00-02-proxpac-xl-proximity-transducer","title":"Bently Nevada 330880-28-15-035-00-02 PROXPAC XL Proximity Transducer","description":"\u003cp\u003eThe Bently Nevada 330880-28-15-035-00-02 is a high-performance PROXPAC XL Proximity Transducer Assembly. This unit integrates a 3300 XL 8 mm proximity probe and a Proximitor sensor into a single, self-contained housing. By combining these components, the assembly eliminates the requirement for external extension cables and separate Proximitor housings, simplifying field wiring directly between the monitoring system and the transducer assembly.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eIntegrated 3300 XL 8 mm proximity probe and sensor system.\u003c\/li\u003e\n\u003cli\u003eConstructed from Polyphenylene Sulfide (PPS), an advanced molded thermoplastic reinforced with glass and conductive fibers for structural strength and electrostatic dissipation.\u003c\/li\u003e\n\u003cli\u003eRated for Type 4X and IP66 environments, providing robust protection in severe industrial conditions.\u003c\/li\u003e\n\u003cli\u003eEliminates the need for extension cables between the probe and sensor.\u003c\/li\u003e\n\u003cli\u003eDirect interface with monitoring equipment reduces installation complexity.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eApplications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSteam and Gas Turbines: Monitoring for shaft vibration, axial position, and eccentricity.\u003c\/li\u003e\n\u003cli\u003eCentrifugal Compressors: Precision tracking of shaft displacement during high-speed gas compression.\u003c\/li\u003e\n\u003cli\u003eHydro Turbines: Rotational dynamics monitoring in power generation.\u003c\/li\u003e\n\u003cli\u003eCentrifugal Pumps: Early detection of bearing wear and misalignment through vibration analysis.\u003c\/li\u003e\n\u003cli\u003eElectric Motors and Generators: Ensuring bearing health and shaft alignment to prevent mechanical failure.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003e330880-28-15-035-00-02\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProbe Type\u003c\/td\u003e\n\u003ctd\u003e3300 XL 8 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStandoff Adapter\u003c\/td\u003e\n\u003ctd\u003e1.5 in (38 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProbe Penetration\u003c\/td\u003e\n\u003ctd\u003e3.5 in (96 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting Thread\u003c\/td\u003e\n\u003ctd\u003e3\/4-14 NPT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHousing Material\u003c\/td\u003e\n\u003ctd\u003ePolyphenylene Sulfide (PPS)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnvironmental Rating\u003c\/td\u003e\n\u003ctd\u003eIP66 \/ Type 4X\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eInstallation Guidelines\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMount the assembly using the specified 3\/4-14 NPT mounting thread.\u003c\/li\u003e\n\u003cli\u003eEnsure all conduit entries are properly sealed to maintain the IP66\/Type 4X rating and prevent moisture ingress.\u003c\/li\u003e\n\u003cli\u003eVerify that the 1.5-inch standoff and 3.5-inch probe penetration provide adequate clearance from all internal machine components before final installation.\u003c\/li\u003e\n\u003cli\u003eHandle the probe tip with care to avoid mechanical damage or calibration drift.\u003c\/li\u003e\n\u003cli\u003eEnsure the system is powered down before performing any wiring or maintenance on the transducer assembly.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\u003ch3\u003eWhat is the primary advantage of the PROXPAC XL design?\u003c\/h3\u003e\u003cp\u003eThe PROXPAC XL design integrates the Proximitor sensor directly into the housing, removing the need for extension cables and separate sensor mounting, which simplifies installation and reduces potential points of failure.\u003c\/p\u003e\u003ch3\u003eWhat materials are used in the housing?\u003c\/h3\u003e\u003cp\u003eThe housing is manufactured from Polyphenylene Sulfide (PPS), a durable thermoplastic reinforced with glass and conductive fibers to provide strength and dissipate electrostatic charges.\u003c\/p\u003e\u003ch3\u003eIs this unit suitable for harsh environments?\u003c\/h3\u003e\u003cp\u003eYes, the assembly is rated for IP66 and Type 4X, making it suitable for use in demanding industrial environments where protection against dust and moisture is required.\u003c\/p\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":51084219252988,"sku":"330880-28-15-035-00-02","price":99.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/9983\/1292\/files\/wm_1_9e396e2e-2413-4c44-aa79-1bb168e0d166.jpg?v=1788020910","url":"https:\/\/www.electronicplc.com\/ar\/products\/bently-nevada-330880-28-15-035-00-02-proxpac-xl-proximity-transducer","provider":"Electronic PLC","version":"1.0","type":"link"}