{"product_id":"f3nc51-0n-positioning-module-yokogawa","title":"F3NC51-0N Positioning Module YOKOGAWA","description":"\u003cp\u003eThe \u003cstrong\u003eYOKOGAWA F3NC51-0N\u003c\/strong\u003e (\u003cstrong\u003eF3NC51-0N\u003c\/strong\u003e) is a high-performance, single-axis positioning module designed for the FA-M3 sequence CPU series. It provides precise motion control through an analog velocity command interface, bridging the gap between digital PLC logic and high-speed servo drive regulation.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eF3NC51-0N\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eYOKOGAWA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eJapan\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.3kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e28.9 mm x 100 mm x 83.2 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003e390 mA @ 5 VDC \/ 10 mA @ 24 VDC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAxis Control\u003c\/td\u003e\n\u003ctd\u003e1-Axis\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eControl Method\u003c\/td\u003e\n\u003ctd\u003eSemi-closed loop (-10 to +10 V output)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFeedback Interface\u003c\/td\u003e\n\u003ctd\u003eIncremental (A\/B phase) \/ Absolute encoder\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePosition Range\u003c\/td\u003e\n\u003ctd\u003e-134,217,728 to +134,217,727 pulses\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003ePrecision Motion Control Architecture\u003c\/h3\u003e\n\u003cp\u003eThe F3NC51-0N module manages motion by converting high-speed pulse feedback from encoders into a precise -10 V to +10 V analog velocity command. This analog signal allows the module to command servo drives with high resolution, enabling smooth velocity control and dynamic acceleration profiling. The module supports various profiles, including \u003cstrong\u003eTrapezoidal\u003c\/strong\u003e, \u003cstrong\u003eTwo-stage linear\u003c\/strong\u003e, and \u003cstrong\u003eS-curve (three-stage)\u003c\/strong\u003e, which are critical for minimizing mechanical vibrations during high-speed moves.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: Does the F3NC51-0N support multi-axis synchronization?\u003c\/p\u003e\n\u003cp\u003eA: Yes, while the module itself controls one axis, multi-axis linear and arc interpolation can be achieved by coordinating multiple modules via the FA-M3 CPU and its system bus, allowing for complex multi-axis motion paths.\u003c\/p\u003e\n\u003cp\u003eQ: Can the module handle high-frequency encoder signals?\u003c\/p\u003e\n\u003cp\u003eA: The module supports incremental encoders with line driver outputs up to a maximum frequency of 2 Mpps (after 4x multiplication), making it suitable for high-resolution positioning tasks.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eShielding:\u003c\/strong\u003e Ensure all encoder feedback cables and analog command cables are shielded and twisted-pair to minimize electromagnetic interference (EMI), which could lead to position drift or erratic velocity command behavior.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGrounding:\u003c\/strong\u003e Bond the shield of the analog cable to the designated signal ground terminal on the module to prevent ground loops between the PLC and the servo driver.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Supply:\u003c\/strong\u003e Use a stable 5 VDC source for the module logic and a clean 24 VDC source for the I\/O signals, ensuring the power supply current capacity exceeds the module's rated consumption.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWiring:\u003c\/strong\u003e Keep signal cables separated from high-current power cables (e.g., motor drive cables) by at least 100-200 mm to prevent induced noise in the analog control signals.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStartup:\u003c\/strong\u003e Utilize the 6 ms maximum startup time in the control logic to ensure the module is fully initialized before attempting to issue motion commands to the servo drive.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Yokogawa","offers":[{"title":"Default Title","offer_id":49262426915068,"sku":"F3NC51-0N","price":99.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/9983\/1292\/files\/F3NC51-0N1.jpg?v=1783562205","url":"https:\/\/www.electronicplc.com\/ar\/products\/f3nc51-0n-positioning-module-yokogawa","provider":"Electronic PLC","version":"1.0","type":"link"}