{"product_id":"vi702-s1-yokogawa-vnet-ip-interface-card-new-original-stock","title":"VI702 S1 YOKOGAWA Vnet\/IP Interface Card | New \u0026 Original Stock","description":"\u003cp\u003eConfigured for network communication synchronization in Vnet\/IP control systems, the \u003cstrong\u003eYOKOGAWA VI702 S1\u003c\/strong\u003e (\u003cstrong\u003eVI702\u003c\/strong\u003e Vnet\/IP Interface Card) provides direct physical and electrical execution of high-speed data transmission between control stations and external network segments.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eVI702 S1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eYOKOGAWA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eJapan\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.16 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e7.2 x 6.3 x 9.2 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003eStandard industrial range\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003eSubject to backplane supply\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBus Interface\u003c\/td\u003e\n\u003ctd\u003eVnet\/IP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting Type\u003c\/td\u003e\n\u003ctd\u003eCard slot installation\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eVnet\/IP Connectivity and Network Performance\u003c\/h3\u003e\n\u003cp\u003eThe VI702 S1 module functions as a dedicated interface to manage deterministic data exchange across the Vnet\/IP network architecture. The module design incorporates channel-to-channel isolation to prevent electrical noise from propagating through the backplane. By facilitating high-speed data packets, the interface ensures that latency-sensitive process control commands are transmitted without collision. The circuitry is calibrated to maintain signal integrity over the 1 Gbps Ethernet physical layer, supporting dual-redundant network paths to eliminate single points of failure within the communication loop.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: Does the VI702 S1 module support hot-swap insertion during system operation?\u003c\/p\u003e\n\u003cp\u003eA: No. The system must be fully de-energized before the module is inserted or removed to prevent potential damage to the Vnet\/IP backplane interface pins and communication circuitry.\u003c\/p\u003e\n\u003cp\u003eQ: Is firmware configuration required upon installation of a new VI702 S1?\u003c\/p\u003e\n\u003cp\u003eA: Yes. The module must be synchronized with the current station firmware version to ensure compatibility with the existing control station environment and network traffic management protocols.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eVerify that the control station power is turned off and secured according to site safety protocols before touching the module.\u003c\/li\u003e\n\u003cli\u003eCarefully align the VI702 S1 with the intended Vnet\/IP interface slot on the backplane to prevent pin deformation.\u003c\/li\u003e\n\u003cli\u003eInsert the card into the slot until the locking levers engage fully to ensure proper electrical contact with the bus.\u003c\/li\u003e\n\u003cli\u003eSecure the module using the integrated retaining screws to provide mechanical stability and vibration resistance.\u003c\/li\u003e\n\u003cli\u003eConnect the shielded Ethernet cables to the module ports; ensure that cable shields are properly grounded to the cabinet chassis to minimize electromagnetic interference.\u003c\/li\u003e\n\u003cli\u003eConfirm the network link status via the status LEDs on the front panel before commissioning the module into the active Vnet\/IP network.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Yokogawa","offers":[{"title":"Default Title","offer_id":49199360606460,"sku":"VI702-S1","price":99.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/9983\/1292\/files\/VI702-S1.jpg?v=1781487121","url":"https:\/\/www.electronicplc.com\/ar\/products\/vi702-s1-yokogawa-vnet-ip-interface-card-new-original-stock","provider":"Electronic PLC","version":"1.0","type":"link"}