{"product_id":"yokogawa-ant401-50-cu1t-optical-esb-bus-repeater-master-module","title":"YOKOGAWA ANT401-50\/CU1T Optical ESB Bus Repeater Master Module","description":"\u003cp\u003eThe \u003cstrong\u003eYOKOGAWA ANT401-50\/CU1T\u003c\/strong\u003e, also cataloged as the \u003cstrong\u003eANT401\u003c\/strong\u003e Optical ESB Bus Repeater Master Module, operates as a dedicated hardware component for extending the reach of the ESB bus architecture across distributed control system (DCS) platforms.\u003c\/p\u003e\n\u003ch3\u003eSuffix Breakdown \u0026amp; Model Matrix\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eANT401\u003c\/strong\u003e: Base model designation for the optical ESB bus repeater master unit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e5\u003c\/strong\u003e: Denotes the standard hardware type without explosion protection requirements.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e0\u003c\/strong\u003e: Identifies the basic functional configuration level.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\/CU1T\u003c\/strong\u003e: Specifies the inclusion of a connector unit integrated with a terminator for the ESB bus.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eANT401-50\/CU1T\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eYOKOGAWA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003ejapan\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.3kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003eStandard Module Format\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003eStandard Industrial Range\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003eSubject to backplane load\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRange\u003c\/td\u003e\n\u003ctd\u003e5 km optical transmission\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInterface\u003c\/td\u003e\n\u003ctd\u003eESB Bus (Optical)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eESB Bus Communication Characteristics\u003c\/h3\u003e\n\u003cp\u003eThe ANT401-50\/CU1T facilitates high-speed data transmission over optical fiber, enabling the extension of ESB bus segments up to 5 km. This module provides essential signal conversion from electrical ESB bus protocols to optical signals, ensuring deterministic data exchange between the control station and remote I\/O nodes. The architecture employs channel-to-channel isolation to prevent ground potential differences between distant nodes from affecting the communication bus. The integrated terminator in the \/CU1T connector unit minimizes signal reflections at the end of the ESB bus segment, maintaining packet integrity for real-time control synchronization.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: Can this master module be used with any fiber-optic cable type?\u003c\/p\u003e\n\u003cp\u003eA: No, the optical interface is calibrated for specific fiber-optic standards compatible with Yokogawa control infrastructure. Using incompatible fiber-optic cabling can lead to excessive signal attenuation and communication failures.\u003c\/p\u003e\n\u003cp\u003eQ: Is the ANT401-50\/CU1T capable of managing redundant optical segments?\u003c\/p\u003e\n\u003cp\u003eA: Yes, the module supports redundancy within the ESB bus architecture. Proper configuration of the master and slave modules is necessary to ensure seamless failover in the event of an optical path fault.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptical Connection\u003c\/strong\u003e: Ensure the fiber-optic connectors are cleaned using industry-standard fiber inspection and cleaning tools before insertion to prevent signal loss due to dust or contaminants.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBackplane Engagement\u003c\/strong\u003e: Align the module vertically with the designated backplane slot. Apply uniform pressure to ensure the card edge connectors fully engage with the bus terminals without forcing the module housing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEarthing and Shielding\u003c\/strong\u003e: Secure the module chassis to the cabinet grounding rail. Proper earthing is required to mitigate electromagnetic interference (EMI) at the electrical interface side of the module.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWiring Segregation\u003c\/strong\u003e: Route the optical fiber cabling away from high-power conduits to avoid accidental mechanical stress or excessive bending, which may lead to permanent fiber core damage.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Yokogawa","offers":[{"title":"Default Title","offer_id":49218352939260,"sku":"ANT401-50\/CU1T","price":99.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/9983\/1292\/files\/ANT5022.jpg?v=1781676548","url":"https:\/\/www.electronicplc.com\/ar\/products\/yokogawa-ant401-50-cu1t-optical-esb-bus-repeater-master-module","provider":"Electronic PLC","version":"1.0","type":"link"}