{"product_id":"yokogawa-nt225aa-04-system-card","title":"Yokogawa NT225AA-04 System Card","description":"\u003cp\u003eThe \u003cstrong\u003eYokogawa NT225AA-04\u003c\/strong\u003e, also cataloged as the \u003cstrong\u003eNT225AA-04\u003c\/strong\u003e System Card, operates as a dedicated hardware component for control logic execution and system communication within Yokogawa FCN\/FCJ autonomous controller platforms.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eNT225AA-04\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eYokogawa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eJapan\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.1 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e2.2 cm x 12.4 cm x 12.6 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003eStandard industrial ambient\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003eSystem-bus dependent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eFieldbus and Process Control Connectivity\u003c\/h3\u003e\n\u003cp\u003eThe NT225AA-04 module functions as a core interface unit for the FCN (Field Control Node) and FCJ (Field Control Junction) systems. Integration involves 4-20 mA HART loop protocol support for field-level device communication, ensuring precise data acquisition from smart instrumentation. The architecture is engineered to provide channel-to-channel isolation, preventing signal noise propagation between discrete process loops. During routine configuration, engineers must ensure that cold junction compensation (CJC) settings are correctly initialized if the system card is employed in thermal measurement loops to maintain accuracy across the input terminal blocks.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: Is the NT225AA-04 module capable of hot-swapping during active system operation?\u003c\/p\u003e\n\u003cp\u003eA: The module is intended for installation within the FCN\/FCJ chassis. While the system architecture supports hardware modularity, hot-swap procedures should strictly follow the specific controller firmware guidelines to prevent potential backplane communication interrupts or data loss.\u003c\/p\u003e\n\u003cp\u003eQ: What is the maximum load capacity when interfacing with field instruments?\u003c\/p\u003e\n\u003cp\u003eA: Load capacity is dictated by the specific loop power supply and the HART communication requirements. Ensure the total resistance in the loop does not exceed the hardware limits specified for the analog input channels to maintain signal linearity.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eVerify that the FCN\/FCJ controller rack is powered down or in a non-operational state before slotting the NT225AA-04 to avoid electrical discharge to the backplane pins.\u003c\/li\u003e\n\u003cli\u003eEnsure proper alignment of the card with the chassis guide rails; do not apply excessive force if resistance is encountered during insertion.\u003c\/li\u003e\n\u003cli\u003eTighten the front-panel captive screws to ensure a rigid connection to the chassis, which acts as a secondary ground path and stabilizes the internal circuitry against vibrations.\u003c\/li\u003e\n\u003cli\u003eShielded cables must be used for all I\/O connections to reduce electromagnetic interference; ensure the shield is terminated at the designated ground bus within the terminal cabinet.\u003c\/li\u003e\n\u003cli\u003eConfirm that the firmware version of the controller is compatible with the NT225AA-04 revision to ensure proper handshaking during the system initialization sequence.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Yokogawa","offers":[{"title":"Default Title","offer_id":49227474927868,"sku":"NT225AA-04","price":99.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/9983\/1292\/files\/ALE111-S50_S11.jpg?v=1782438035","url":"https:\/\/www.electronicplc.com\/ar\/products\/yokogawa-nt225aa-04-system-card","provider":"Electronic PLC","version":"1.0","type":"link"}