{"product_id":"bently-nevada-330500-02-00-velomitor-piezo-velocity-sensors","title":"Bently Nevada 330500-02-00 Velomitor Piezo-Velocity Sensor","description":"\u003cp\u003eThe Bently Nevada 330500-02-00 Velomitor Piezo-Velocity Sensor is a high-performance, solid-state transducer designed for measuring absolute vibration on bearing housings, machine casings, and structural components. Unlike traditional moving-coil velocity transducers, this unit utilizes specialized piezoelectric accelerometer technology with embedded integrated electronics, ensuring long-term reliability and immunity to mechanical wear.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSolid-state design with no moving parts for extended service life.\u003c\/li\u003e\n\u003cli\u003eCapable of mounting at any angle of orientation (vertical, horizontal, or angular).\u003c\/li\u003e\n\u003cli\u003eIncorporates embedded electronics for direct signal processing.\u003c\/li\u003e\n\u003cli\u003eHigh resonant frequency (\u0026gt;12 kHz) for accurate vibration monitoring.\u003c\/li\u003e\n\u003cli\u003eRobust construction suitable for demanding industrial environments.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eApplications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eRotating Machinery: Steam and gas turbines, compressors, pumps, and electric motors.\u003c\/li\u003e\n\u003cli\u003eIndustrial Equipment: Fans, blowers, and centrifuges.\u003c\/li\u003e\n\u003cli\u003eCondition Monitoring: Detecting cavitation, misalignment, and structural looseness in high-speed machinery.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003e330500-02-00\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSensitivity\u003c\/td\u003e\n\u003ctd\u003e3.94 mV\/mm\/s (100 mV\/in\/s) ±5%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVelocity Range\u003c\/td\u003e\n\u003ctd\u003e1270 mm\/s (50 in\/s) peak\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAmplitude Linearity\u003c\/td\u003e\n\u003ctd\u003e±2% to 152 mm\/s (6 in\/s) peak\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTransverse Sensitivity\u003c\/td\u003e\n\u003ctd\u003eLess than 5% of sensitivity\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounted Resonant Frequency\u003c\/td\u003e\n\u003ctd\u003eGreater than 12 kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput Bias Voltage\u003c\/td\u003e\n\u003ctd\u003e-12 ±3.0 VDC (referenced to Pin A)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDynamic Output Impedance\u003c\/td\u003e\n\u003ctd\u003eLess than 2400 Ohm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temperature\u003c\/td\u003e\n\u003ctd\u003e-55 degC to 121 degC (-67 degF to 250 degF)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eInstallation Guidelines\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMounting: Ensure the sensor is securely mounted to the machine casing or bearing housing using the specified M8 x 1 thread.\u003c\/li\u003e\n\u003cli\u003eCabling: Use a 2-conductor twisted, shielded cable (e.g., 18 AWG) to maintain signal integrity and minimize EMI interference.\u003c\/li\u003e\n\u003cli\u003ePolarity: The sensor is configured such that movement toward the connector results in Pin A becoming positive relative to Pin B.\u003c\/li\u003e\n\u003cli\u003ePower: Ensure the power supply provides the required -12 VDC bias voltage.\u003c\/li\u003e\n\u003cli\u003eEnvironment: While the sensor is robust, avoid mounting in areas subject to extreme thermal shock or direct impact.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFAQs\u003c\/h3\u003e\u003ch3\u003eWhat is the 330500-02-00 Sensor?\u003c\/h3\u003e\u003cp\u003eThe 330500-02-00 is a Bently Nevada Velomitor Piezo-Velocity Sensor designed to measure absolute vibration relative to free space. It is a solid-state, specialized piezoelectric accelerometer with no moving parts, suitable for monitoring industrial machinery.\u003c\/p\u003e\u003ch3\u003eWhat is the function of the 330500-02-00?\u003c\/h3\u003e\u003cp\u003eIt measures absolute bearing housing, casing, or structural vibration by converting mechanical vibration into an electrical signal for monitoring and analysis.\u003c\/p\u003e\u003ch3\u003eCan this sensor be mounted in any orientation?\u003c\/h3\u003e\u003cp\u003eYes, because the sensor uses solid-state electronics and has no moving parts, it does not suffer from mechanical degradation and can be mounted vertically, horizontally, or at any other angle of orientation.\u003c\/p\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":50976476528892,"sku":"330500-02-00","price":99.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/9983\/1292\/files\/wm_1_bc3b767d-42b0-478a-b881-5f09824923d7.jpg?v=1786648893","url":"https:\/\/www.electronicplc.com\/es\/products\/bently-nevada-330500-02-00-velomitor-piezo-velocity-sensors","provider":"Electronic PLC","version":"1.0","type":"link"}