{"product_id":"bently-nevada-330930-040-00-00-3300-nsv-extension-cable","title":"Bently Nevada 330930-040-00-00 3300 NSv Extension Cable","description":"\u003cp\u003eThe Bently Nevada 330930-040-00-00 is a 4.0-meter (13.1-foot) extension cable designed for use with the 3300 NSv (Narrow Side-view) eddy current proximity transducer system. This non-armored cable facilitates the connection between the NSv proximity probe and the Proximitor sensor, ensuring reliable signal transmission in space-constrained industrial monitoring applications.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDesigned for small target applications and machines with shaft diameters smaller than 51 mm (2 in).\u003c\/li\u003e\n\u003cli\u003eCompatible with 3300 NSv series probes and Proximitor sensors.\u003c\/li\u003e\n\u003cli\u003eProvides an average scale factor of 7.87 V\/mm (200 mV\/mil).\u003c\/li\u003e\n\u003cli\u003eConstructed with 75 Ohm coaxial cable and FEP insulation for durability in harsh environments.\u003c\/li\u003e\n\u003cli\u003eCompact design allows for installation in tight spaces, such as between thrust bearing pads.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eApplications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eRadial vibration and radial position measurement on small-diameter shafts.\u003c\/li\u003e\n\u003cli\u003eAxial (thrust) position measurements on flat targets.\u003c\/li\u003e\n\u003cli\u003eTachometer and zero speed measurements.\u003c\/li\u003e\n\u003cli\u003ePhase reference (Keyphasor) signal acquisition.\u003c\/li\u003e\n\u003cli\u003eCommonly used in centrifugal air compressors, refrigeration compressors, and process gas compressors.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003e330930-040-00-00\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable Length\u003c\/td\u003e\n\u003ctd\u003e4.0 meters (13.1 feet)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eArmor\u003c\/td\u003e\n\u003ctd\u003eNone (Non-armored)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable Material\u003c\/td\u003e\n\u003ctd\u003e75 Ohm coaxial, FEP insulated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temperature\u003c\/td\u003e\n\u003ctd\u003e-52 degC to +177 degC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSystem Compatibility\u003c\/td\u003e\n\u003ctd\u003e3300 NSv Proximity Transducer System\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eInstallation Guidelines\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eEnsure the total system length (probe + extension cable) matches the configuration requirements of the Proximitor sensor.\u003c\/li\u003e\n\u003cli\u003eHandle coaxial cables with care; avoid sharp bends or kinks that may alter the impedance or damage the internal conductor.\u003c\/li\u003e\n\u003cli\u003eEnsure connectors are clean and free of debris before mating to prevent signal noise or ground loops.\u003c\/li\u003e\n\u003cli\u003eRoute cables away from high-EMI sources, such as high-voltage power lines or variable frequency drives, to maintain signal integrity.\u003c\/li\u003e\n\u003cli\u003eVerify that the probe gap is set correctly (typically 1.0 mm or 40 mils) during system commissioning.\u003c\/li\u003e\n\u003cli\u003eAlways power down the monitoring system before disconnecting or connecting transducer components.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\u003ch3\u003eWhat is the 330930-040-00-00?\u003c\/h3\u003e\u003cp\u003eIt is a 4.0-meter standard extension cable for the Bently Nevada 3300 NSv Proximity Transducer System, used to connect the probe to the Proximitor sensor.\u003c\/p\u003e\u003ch3\u003eCan this cable be used with standard 3300 XL 8mm probes?\u003c\/h3\u003e\u003cp\u003eNo, the NSv system is specifically designed for the smaller 5mm probe tip diameter and has unique electrical characteristics; it must be used with compatible NSv components.\u003c\/p\u003e\u003ch3\u003eWhat is the required system length?\u003c\/h3\u003e\u003cp\u003eThe total system length must match the Proximitor sensor configuration. For this 4.0m extension cable, it is typically paired with a 1.0m probe for a 5.0m total system length or a 5.0m probe for a 9.0m total system length.\u003c\/p\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":50956827689212,"sku":"330930-040-00-00","price":99.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/9983\/1292\/files\/wm_1_96ce7c9a-a4f6-4598-a9f2-ad11938e754e.jpg?v=1786324438","url":"https:\/\/www.electronicplc.com\/es\/products\/bently-nevada-330930-040-00-00-3300-nsv-extension-cable","provider":"Electronic PLC","version":"1.0","type":"link"}