{"product_id":"f3da08-5n-analog-output-module-yokogawa","title":"F3DA08-5N Analog Output Module YOKOGAWA","description":"\u003cp\u003eThe \u003cstrong\u003eYOKOGAWA F3DA08-5N\u003c\/strong\u003e (\u003cstrong\u003eF3DA08-5N\u003c\/strong\u003e Analog Output Module) serves as the primary I\/O module utilized to execute high-density signal conversion across FA-M3 (PLC) controller platforms. The module provides direct electrical execution of -10 to 10 VDC output signals across 8 independent channels, functioning as an interface component for actuator control and process positioning.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eF3DA08-5N\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eYOKOGAWA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eJapan\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.3kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003eStandard PLC module footprint\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e0 to 55 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003e5 VDC \/ 24 VDC internal supply\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChannel Count\u003c\/td\u003e\n\u003ctd\u003e8 channels\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput Range\u003c\/td\u003e\n\u003ctd\u003e-10 to 10 VDC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eI\/O Density Scaling and Backplane Communication\u003c\/h3\u003e\n\u003cp\u003eThe F3DA08-5N is engineered for high-density I\/O scaling within FA-M3 modular rack systems. The module facilitates rapid backplane bus communication, allowing the host CPU to refresh all 8 output channels within a single scan cycle. This deterministic performance is supported by firmware flash compatibility, enabling the module to interface with various processor revisions without requiring hardware replacement. The output circuitry is designed to provide high-resolution voltage sourcing, maintaining signal stability even under varying capacitive loads typical of long-distance actuator signaling.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: Does the F3DA08-5N support hot-swapping within the PLC rack?\u003c\/p\u003e\n\u003cp\u003eA: No. The module is not designed for hot-swapping. The rack power supply must be disabled before inserting or extracting the module to avoid damage to the backplane communication pins.\u003c\/p\u003e\n\u003cp\u003eQ: Can the channels be configured for current output instead of voltage?\u003c\/p\u003e\n\u003cp\u003eA: No. The F3DA08-5N is a dedicated voltage output module providing -10 to 10 VDC. Attempting to draw current loads beyond the specified limits or applying external voltages to the outputs will result in permanent damage to the channel drivers.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003ePower down the PLC base unit before handling the module to prevent electrical arcing on the bus pins.\u003c\/li\u003e\n\u003cli\u003eAlign the module with the slot guides on the base unit and press firmly until the locking mechanism engages.\u003c\/li\u003e\n\u003cli\u003eTighten the module mounting screws to the base unit frame to ensure proper grounding and mechanical stability.\u003c\/li\u003e\n\u003cli\u003eUtilize shielded twisted-pair cables for all voltage outputs to minimize induced noise. Bond the shield at the cabinet ground bus, not at the field device end, to prevent ground loop currents.\u003c\/li\u003e\n\u003cli\u003eVerify output accuracy using a digital multimeter at the terminal block before connecting final field actuators to ensure the signal conforms to the process requirements.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Yokogawa","offers":[{"title":"Default Title","offer_id":50115774677244,"sku":"F3DA08-5N","price":99.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/9983\/1292\/files\/F3DA08-5N1.jpg?v=1784165735","url":"https:\/\/www.electronicplc.com\/es\/products\/f3da08-5n-analog-output-module-yokogawa","provider":"Electronic PLC","version":"1.0","type":"link"}