{"product_id":"ks1-10-signal-cable-yokogawa","title":"KS1-10 Signal Cable Yokogawa","description":"\u003cp\u003eThe \u003cstrong\u003eYokogawa KS1-10\u003c\/strong\u003e, also cataloged as the \u003cstrong\u003eKS1\u003c\/strong\u003e Signal Cable, operates as a dedicated hardware component for 40-pin to 40-pin electrical interconnection between process I\/O modules and terminal blocks within distributed control system platforms.\u003c\/p\u003e\n\u003ch3\u003eSuffix Breakdown \u0026amp; Model Matrix\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eKS1\u003c\/strong\u003e: Base model designation for 40-pin to 40-pin signal cable architecture.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e10\u003c\/strong\u003e: Length designation indicating a total cable run of 10 m.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eKS1-10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eYokogawa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eJapan\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.8 kg \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e10 m (length)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e-20 to 70 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003eNot applicable (Passive component)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePin Configuration\u003c\/td\u003e\n\u003ctd\u003e40-pin to 40-pin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInsulation Resistance\u003c\/td\u003e\n\u003ctd\u003e50 M ohms minimum at 500 V DC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eProcess Control Connectivity and Signal Integrity\u003c\/h3\u003e\n\u003cp\u003eThe KS1 series utilizes multi-conductor shielded construction to maintain 4-20 mA HART loop protocol integrity and digital signal transmission clarity within control cabinets. The 40-pin connector interfaces facilitate high-density signal mapping across Yokogawa I\/O arrays. To minimize crosstalk and attenuation over the 10 m span, the conductors meet strict impedance requirements for DCS fieldbus applications. Proper termination of the cable shield at the designated cabinet chassis ground point is required to mitigate electromagnetic interference in industrial environments.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: Can the KS1-10 cable be extended or spliced if a longer reach is required?\u003c\/p\u003e\n\u003cp\u003eA: No. Splicing or extending the KS1-10 cable is not recommended as it compromises the shielded signal path, increases the risk of impedance mismatch, and invalidates the factory-molded integrity of the 40-pin connectors.\u003c\/p\u003e\n\u003cp\u003eQ: What are the primary spacing requirements when routing this cable near AC power conduits?\u003c\/p\u003e\n\u003cp\u003eA: To prevent noise coupling, maintain a minimum separation of 150 mm between the signal cable and any high-voltage AC power lines. Utilize dedicated metal wire ducts if parallel routing is unavoidable.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eInspect the 40-pin connector pins for debris or deformation before mating with the I\/O module interface.\u003c\/li\u003e\n\u003cli\u003eEnsure the connector locking clips are fully engaged to prevent accidental disconnection due to thermal expansion or cabinet vibration.\u003c\/li\u003e\n\u003cli\u003eAdhere to a minimum bend radius of 10 times the cable diameter to prevent internal conductor fatigue or damage to the insulation sheath.\u003c\/li\u003e\n\u003cli\u003eSecure the cable run using non-conductive cable ties to the cabinet frame to relieve mechanical stress on the interface terminals.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Yokogawa","offers":[{"title":"Default Title","offer_id":49983987319036,"sku":"KS1-10","price":99.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/9983\/1292\/files\/KS1-10B.jpg?v=1781487120","url":"https:\/\/www.electronicplc.com\/es\/products\/ks1-10-signal-cable-yokogawa","provider":"Electronic PLC","version":"1.0","type":"link"}