{"product_id":"mechanical-relay-output-board-yokogawa-arm55c-000","title":"Mechanical Relay Output Board Yokogawa ARM55C-000","description":"\u003cp\u003eConfigured for high-density digital signal switching in CENTUM VP systems, the \u003cstrong\u003eYokogawa ARM55C-000\u003c\/strong\u003e (\u003cstrong\u003eARM55C\u003c\/strong\u003e Mechanical Relay Output Board) provides direct physical and electrical execution of dry-contact output switching for field devices.\u003c\/p\u003e\n\u003ch3\u003eSuffix Breakdown \u0026amp; Model Matrix\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eARM55C\u003c\/strong\u003e: Base series designation for 32-channel mechanical relay output boards.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e000\u003c\/strong\u003e: Configuration code indicating standard output density and logic arrangement.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eARM55C-000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eYokogawa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eJapan\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e2.2 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e19-inch rack-mount standard\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e0 deg C to 50 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003e24 V DC (0.85 A maximum)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput Channels\u003c\/td\u003e\n\u003ctd\u003e32 dry-contact relays (NO\/NC)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Load\u003c\/td\u003e\n\u003ctd\u003e250 V AC\/30 V DC @ 2 A; 125 V DC @ 0.1 A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMin Load\u003c\/td\u003e\n\u003ctd\u003e5 V DC @ 10 mA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eRelay Logic and Galvanic Isolation\u003c\/h3\u003e\n\u003cp\u003eThe ARM55C-000 utilizes mechanical relays to provide complete galvanic isolation between the low-voltage DCS logic circuits and the field-side load circuits. This isolation prevents high-voltage transients from propagating back to the CENTUM VP backplane. Each channel is field-configurable for Normally Open (NO) or Normally Closed (NC) operation, allowing the board to execute fail-safe state logic based on specific process safety requirements. The dielectric strength of 2 kV between field terminals and case ensures robust protection against common industrial electrical faults.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: Can the ARM55C-000 be used for high-speed pulse outputs?\u003c\/p\u003e\n\u003cp\u003eA: No. As a mechanical relay board, the switching speed is limited by the mechanical travel time of the relay contacts. It is designed for low-speed digital control, such as driving solenoid valves or contactor coils, and is not suitable for high-frequency pulse width modulation (PWM) or rapid pulsing.\u003c\/p\u003e\n\u003cp\u003eQ: What is the minimum load requirement to prevent contact oxidation?\u003c\/p\u003e\n\u003cp\u003eA: To maintain reliable contact closure over time, each channel requires a minimum load of 5 V DC at 10 mA. Operating below this threshold can lead to the formation of insulating oxide layers on the relay contacts, resulting in intermittent operation.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRack Mounting: Secure the unit into a 19-inch rack using M3.5 screws. Ensure the enclosure provides sufficient grounding to the cabinet frame to utilize the board's dielectric strength ratings effectively.\u003c\/li\u003e\n\u003cli\u003eWiring Segregation: Maintain physical separation between relay output wiring (carrying AC\/DC load power) and sensitive low-voltage signal lines. Induced EMI can cause false triggers if relay lines are bundled with analog signal cables.\u003c\/li\u003e\n\u003cli\u003eSurge Suppression: When switching inductive loads (such as motor contactors or solenoid coils), install an external flyback diode (for DC) or an RC snubber network (for AC) across the load. This prevents back-EMF from arcing across the relay contacts, which significantly extends contact service life.\u003c\/li\u003e\n\u003cli\u003eThermal Management: Ensure the cabinet environment remains between 0 and 50 deg C. Since mechanical relays dissipate heat during continuous engagement, maintain adequate spacing for convection cooling to prevent ambient temperature escalation.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Yokogawa","offers":[{"title":"Default Title","offer_id":49266000593148,"sku":"ARM55C-000","price":99.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/9983\/1292\/files\/ARM55C-0001.jpg?v=1783647838","url":"https:\/\/www.electronicplc.com\/es\/products\/mechanical-relay-output-board-yokogawa-arm55c-000","provider":"Electronic PLC","version":"1.0","type":"link"}