{"product_id":"nfai543-h50-a4s00-analog-output-module-yokogawa","title":"NFAI543-H50\/A4S00 Analog Output Module YOKOGAWA","description":"\u003cp\u003eConfigured for current loop control in DCS platforms, the \u003cstrong\u003eYOKOGAWA NFAI543-H50\/A4S00\u003c\/strong\u003e (\u003cstrong\u003eNFAI543\u003c\/strong\u003e Analog Output Module) provides direct physical\/electrical execution. This component facilitates the transmission of 4-20 mA analog signals to field devices, supporting isolated channel processing within the CENTUM VP or similar Yokogawa distributed control system architectures.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eNFAI543-H50\/A4S00\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eYOKOGAWA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eJAPAN\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.4 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e2.5 cm x 20.3 cm x 15.2 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e-20 to 70 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003e5.5 W (Max)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput Signal\u003c\/td\u003e\n\u003ctd\u003e4-20 mA DC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAccuracy\u003c\/td\u003e\n\u003ctd\u003e0.1 % of span\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eChannel-to-Channel Isolation and Loop Protocol\u003c\/h3\u003e\n\u003cp\u003eThe NFAI543 module utilizes galvanic isolation techniques to prevent ground loops and common-mode noise interference across high-density analog output channels. Each channel supports the 4-20 mA HART loop protocol, allowing for digital communication overlays on standard analog control paths. The internal circuitry ensures that individual channel failures do not propagate to the common backplane bus, maintaining integrity in the surrounding process control loops.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: Does the NFAI543-H50\/A4S00 support hot-swapping while the system is powered?\u003c\/p\u003e\n\u003cp\u003eA: Yes, the module is designed for hot-swap capability within the Yokogawa base plate, provided the system configuration supports online maintenance modes.\u003c\/p\u003e\n\u003cp\u003eQ: What is the maximum load resistance supported by this analog output channel?\u003c\/p\u003e\n\u003cp\u003eA: The channel is designed to drive a maximum load resistance of 750 Ohm at 20 mA, accounting for line resistance and field device impedance.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eEnsure the module is inserted into the designated slot on the backplane, confirming that the guide pins are correctly aligned before engaging the connector.\u003c\/li\u003e\n\u003cli\u003eSecure the module using the top and bottom latching screws to maintain electrical contact with the backplane bus.\u003c\/li\u003e\n\u003cli\u003eShielded twisted-pair cabling is mandatory for 4-20 mA loops to mitigate electromagnetic interference in industrial environments.\u003c\/li\u003e\n\u003cli\u003eThe cable shield must be grounded at one end only, typically at the marshalling cabinet, to prevent ground loop currents from affecting the signal accuracy.\u003c\/li\u003e\n\u003cli\u003eEnsure the ambient operating temperature remains within the specified range of -20 to 70 deg C, with adequate air circulation around the module vents.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Yokogawa","offers":[{"title":"Default Title","offer_id":49778847023356,"sku":"NFAI543-H50\/A4S00","price":99.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/9983\/1292\/files\/NFAI543-S50_S1.jpg?v=1783474799","url":"https:\/\/www.electronicplc.com\/es\/products\/nfai543-h50-a4s00-analog-output-module-yokogawa","provider":"Electronic PLC","version":"1.0","type":"link"}