{"product_id":"srm53d-000-br4-analog-terminal-board-yokogawa","title":"SRM53D-000\/BR4 Analog Terminal Board Yokogawa","description":"\u003cp\u003eConfigured for signal integration within ProSafe-RS safety systems, the \u003cstrong\u003eYokogawa SRM53D-000\/BR4\u003c\/strong\u003e (\u003cstrong\u003eSRM53D\u003c\/strong\u003e Analog Terminal Board) provides direct physical and electrical execution of field-to-controller signal transition.\u003c\/p\u003e\n\u003ch3\u003eSuffix Breakdown \u0026amp; Model Matrix\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSRM53D\u003c\/strong\u003e: Base series designation for analog terminal boards used in safety-critical instrumentation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e000\u003c\/strong\u003e: Configuration code indicating standard output density and terminal arrangement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBR4\u003c\/strong\u003e: Specifies the inclusion of dedicated safety relay components for enhanced protection logic.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eSRM53D-000\/BR4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eYokogawa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eJapan\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e2.7 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e19-inch rack-mount standard\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e-20 deg C to 70 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003eNot applicable (Passive\/Relay logic)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput Capacity\u003c\/td\u003e\n\u003ctd\u003e8 x 2 dry contact outputs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTerminal Type\u003c\/td\u003e\n\u003ctd\u003eM4 screw terminals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eSafety SIS Integration and Galvanic Isolation\u003c\/h3\u003e\n\u003cp\u003eThe SRM53D-000\/BR4 is engineered to support the rigorous requirements of safety-instrumented systems (SIS) by incorporating built-in safety relays. These relays provide galvanic isolation between field devices and the ProSafe-RS controller backplane, which is necessary for fail-safe state execution during process upsets. This architecture ensures that faults originating in the field do not propagate to the safety controller, thereby maintaining the integrity of the loop while facilitating 4-20 mA HART loop protocol connectivity when required by the control strategy.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: Can the SRM53D-000\/BR4 be utilized in non-safety applications?\u003c\/p\u003e\n\u003cp\u003eA: While designed for ProSafe-RS, the board can be used for general-purpose signal routing. However, the relay logic must be evaluated to ensure the switching current and voltage ratings are compatible with the specific non-safety field instrumentation.\u003c\/p\u003e\n\u003cp\u003eQ: Is the terminal board hot-swappable?\u003c\/p\u003e\n\u003cp\u003eA: No. The SRM53D-000\/BR4 is a field termination component with direct M4 screw-terminal connectivity. It is not designed for hot-swapping; all field wiring must be isolated and the controller power removed before maintenance or component replacement.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRack Mounting: Ensure the unit is installed in a standard 19-inch rack. Secure all mounting screws to prevent vibration-induced loosening, which can lead to intermittent contact on the M4 terminals.\u003c\/li\u003e\n\u003cli\u003eTerminal Torque: Tighten M4 screw terminals to the manufacturer-specified torque limit (typically 1.2 Nm) to ensure a gas-tight connection while preventing damage to the terminal block threads.\u003c\/li\u003e\n\u003cli\u003eShielding and Grounding: Connect the cable shields to the cabinet instrument earth rail to maintain effective surge protection. Ensure the terminal board chassis itself is bonded to the main cabinet ground.\u003c\/li\u003e\n\u003cli\u003eThermal Management: Maintain sufficient spacing between the terminal board and heat-generating equipment to ensure the ambient operating environment remains within the -20 deg C to 70 deg C range.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Yokogawa","offers":[{"title":"Default Title","offer_id":49265754046716,"sku":"SRM53D-000\/BR4","price":99.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/9983\/1292\/files\/AEA4D-00_S12.jpg?v=1783647837","url":"https:\/\/www.electronicplc.com\/es\/products\/srm53d-000-br4-analog-terminal-board-yokogawa","provider":"Electronic PLC","version":"1.0","type":"link"}