{"product_id":"7m190-ydm06-yokogawa-analog-input-module-new-original-stock","title":"7M190-YDM06 Yokogawa Analog Input Module | New \u0026 Original Stock","description":"\u003cp\u003eThe \u003cstrong\u003eYokogawa 7M190-YDM06\u003c\/strong\u003e, also cataloged as the \u003cstrong\u003e7M190-YDM06\u003c\/strong\u003e Analog Input Module, operates as a dedicated hardware component for multi-sensor signal acquisition within the CENTUM CS 3000 distributed control system (DCS). This module provides direct electrical execution of analog-to-digital signal conversion, supporting voltage, current, thermocouple, and RTD inputs to facilitate high-accuracy process data monitoring.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003e7M190-YDM06\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eYokogawa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eJapan\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.5 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e-20 to +70 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003e24 VDC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChannels\u003c\/td\u003e\n\u003ctd\u003eConfigurable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eResolution\u003c\/td\u003e\n\u003ctd\u003e16-bit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAccuracy\u003c\/td\u003e\n\u003ctd\u003e±0.1% of span\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIsolation\u003c\/td\u003e\n\u003ctd\u003e500 VDC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCommunication\u003c\/td\u003e\n\u003ctd\u003eProprietary Digital Protocol\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eProcess Control and DCS Connectivity\u003c\/h3\u003e\n\u003cp\u003eThe 7M190-YDM06 is engineered for integration into the CENTUM CS 3000 architecture, utilizing a proprietary digital communication protocol to ensure deterministic data exchange between field sensors and control processors. The module’s 16-bit resolution ensures high-fidelity representation of analog signals, while the 500 VDC isolation voltage prevents ground potential differences from affecting measurement accuracy. This hardware supports configurable input types, allowing for flexible deployment across diverse field instrumentation, including temperature-sensitive thermocouple and RTD circuits.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: Does the 7M190-YDM06 support hot-swapping during active system operation?\u003c\/p\u003e\n\u003cp\u003eA: No, this module does not support hot-swapping. The controller station must be de-energized or placed in a defined maintenance mode to prevent backplane bus communication errors or electrical damage during module removal or installation.\u003c\/p\u003e\n\u003cp\u003eQ: How is the sampling rate determined for this module?\u003c\/p\u003e\n\u003cp\u003eA: The sampling rate is dependent on the specific system configuration and the number of active channels; it is managed by the CENTUM CS 3000 system-level synchronization to ensure timing consistency across the control network.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eEnsure the control station power is completely disconnected before inserting the 7M190-YDM06 into the backplane slot.\u003c\/li\u003e\n\u003cli\u003eVerify the alignment of the module connectors; ensure they are fully seated to maintain a robust connection to the proprietary digital communication bus.\u003c\/li\u003e\n\u003cli\u003eSecure the front-panel captive screws to ensure mechanical stability and proper grounding of the module chassis.\u003c\/li\u003e\n\u003cli\u003eUtilize shielded cabling for all analog inputs to maintain the ±0.1% accuracy specification and mitigate electromagnetic interference (EMI).\u003c\/li\u003e\n\u003cli\u003eConfirm that the terminal wiring matches the specific sensor type (voltage, current, TC, or RTD) as configured in the DCS software to prevent input channel overload.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Yokogawa","offers":[{"title":"Default Title","offer_id":49161557410044,"sku":"7M190-YDM06","price":99.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/9983\/1292\/files\/F3SP71-4S.jpg?v=1780538179","url":"https:\/\/www.electronicplc.com\/products\/7m190-ydm06-yokogawa-analog-input-module-new-original-stock","provider":"Electronic PLC","version":"1.0","type":"link"}