{"product_id":"adm12c-s3-yokogawa-digital-input-module-new-original-stock","title":"ADM12C S3 Yokogawa Digital Input Module New \u0026 Original Stock","description":"\u003cp\u003eConfigured for discrete signal acquisition in distributed control networks, the \u003cstrong\u003eYokogawa ADM12C S3\u003c\/strong\u003e (\u003cstrong\u003eADM12C S3\u003c\/strong\u003e Digital Input Module) provides direct physical monitoring of 32 binary status inputs from field-side sensors and switches. The \u003cstrong\u003eADM12C S3\u003c\/strong\u003e serves as the primary digital input module utilized to execute state change acquisition across Yokogawa control system platforms.\u003c\/p\u003e\n\u003ch3\u003eSuffix Breakdown \u0026amp; Model Matrix\u003c\/h3\u003e\n\u003cp\u003eThe ADM12C S3 designation specifies a high-density 32-point hardware configuration. This model is optimized for space-constrained cabinet designs where multi-point digital signal processing is required within a single modular slot.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eADM12C S3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eYokogawa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eJapan\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.28 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003eStandard high-density module form factor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e0 to 60 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003e4 W (typical)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput Density\u003c\/td\u003e\n\u003ctd\u003e32 points\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSignal Type\u003c\/td\u003e\n\u003ctd\u003eDigital Discrete\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eDCS Process Control Features\u003c\/h3\u003e\n\u003cp\u003eThe ADM12C S3 integrates into the DCS architecture to support high-speed I\/O density scaling. It utilizes internal galvanic isolation to ensure that field-side transients do not propagate to the backplane bus. This architecture maintains deterministic data throughput, allowing for the simultaneous monitoring of 32 distinct input channels with minimized latency, ensuring accurate state capture for the CENTUM control logic.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: Does the 32-point density requirement increase the backplane power load compared to 16-point modules?\u003c\/p\u003e\n\u003cp\u003eA: Yes, the increased channel density results in higher quiescent current draw from the system backplane; ensure the power supply modules are rated for the aggregate load of all installed high-density cards.\u003c\/p\u003e\n\u003cp\u003eQ: Is this module compatible with existing 16-point wiring harnesses?\u003c\/p\u003e\n\u003cp\u003eA: No, the 32-point architecture requires specific high-density transition cabling or terminal board re-wiring to accommodate the doubled input signal density.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eMount the module onto the dedicated system rack, ensuring the rear connector is fully seated to guarantee backplane bus communication stability.\u003c\/li\u003e\n\u003cli\u003eRoute signal conductors through shielded wireways, strictly maintaining separation from high-voltage AC cabling to prevent induced noise on the digital inputs.\u003c\/li\u003e\n\u003cli\u003eTerminate signal wires using appropriate stripping lengths to avoid exposed conductors while ensuring full contact engagement within the terminal assembly.\u003c\/li\u003e\n\u003cli\u003eVerify that the field-side input voltage levels comply with the digital signal threshold specifications to prevent intermittent signal chatter.\u003c\/li\u003e\n\u003cli\u003eInspect the backplane slot for pin integrity prior to module insertion to avoid damaging the high-density contact array.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Yokogawa","offers":[{"title":"Default Title","offer_id":49155702522108,"sku":"ADM12C S3","price":99.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/9983\/1292\/files\/ADM12C_S31.jpg?v=1780450866","url":"https:\/\/www.electronicplc.com\/products\/adm12c-s3-yokogawa-digital-input-module-new-original-stock","provider":"Electronic PLC","version":"1.0","type":"link"}