{"product_id":"aip571-s2-yokogawa-electrical-transceiver-module","title":"AIP571\/S2 YOKOGAWA Electrical Transceiver Module","description":"\u003cp\u003eConfigured for high-speed signal distribution within the CENTUM VP control architecture, the \u003cstrong\u003eYOKOGAWA AIP571 S2\u003c\/strong\u003e (\u003cstrong\u003eAIP571\u003c\/strong\u003e Electrical Transceiver RIO I\/O Module) provides direct physical and electrical execution of fiber-optic data transmission between remote I\/O modules and Field Control Units (FCU).\u003c\/p\u003e\n\u003ch3\u003eSuffix Breakdown \u0026amp; Model Matrix\u003c\/h3\u003e\n\u003cp\u003eThe AIP571 S2 denotes the specific hardware revision optimized for long-distance optical fiber interfacing. No further functional variants or modular sub-codes are designated for this hardware type in standard documentation.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eAIP571 S2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eYOKOGAWA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eJanpan\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e1.5 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e160 mm x 60 mm x 30 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e-20 to 70 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003e20 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Supply\u003c\/td\u003e\n\u003ctd\u003e24 VDC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eData Transfer Rate\u003c\/td\u003e\n\u003ctd\u003e100 Mbps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCommunication Medium\u003c\/td\u003e\n\u003ctd\u003eOptical Fiber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eProcess Instrumentation and Data Connectivity\u003c\/h3\u003e\n\u003cp\u003eThe AIP571 S2 architecture utilizes optical fiber media to provide electrical isolation between distant process segments, preventing ground potential shift issues common in geographically distributed control systems. The module supports redundant communication paths, ensuring that a single-cable failure does not compromise the deterministic data transfer required for CENTUM VP operations. By maintaining a transmission speed of 100 Mbps, the module minimizes protocol latency between the Field Control Unit and the remote I\/O rack.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: Does the AIP571 S2 require external configuration for redundancy management?\u003c\/p\u003e\n\u003cp\u003eA: Redundancy logic is managed by the Field Control Unit (FCU) firmware. When dual modules are installed with redundant optical fiber paths, the system automatically arbitrates between paths to ensure continuous communication.\u003c\/p\u003e\n\u003cp\u003eQ: Is the 24 VDC power supply requirement sensitive to voltage fluctuations?\u003c\/p\u003e\n\u003cp\u003eA: The module is designed to operate within standard industrial 24 VDC ranges. However, to maintain the 100 Mbps transmission stability, it is recommended to use a regulated, low-noise DC power source to prevent ripple interference on the transceiver circuitry.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eEnsure the optical fiber connectors are cleaned using industry-standard lint-free wipes and isopropyl alcohol before insertion to prevent signal attenuation caused by dust contamination.\u003c\/li\u003e\n\u003cli\u003eObserve the minimum bend radius for the installed fiber optic cables to avoid permanent damage to the glass core and subsequent data packet loss.\u003c\/li\u003e\n\u003cli\u003eSecure the 160 mm x 60 mm x 30 mm module onto the mounting rail such that the optical port faces outward, minimizing cable strain.\u003c\/li\u003e\n\u003cli\u003eVerify that the fiber optic cables are routed away from high-power electromagnetic sources, despite the inherent immunity of the optical link itself, to protect the modular connectors from mechanical vibration.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Yokogawa","offers":[{"title":"Default Title","offer_id":49143192125692,"sku":"AIP571\/S2","price":99.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/9983\/1292\/files\/AIP571S12.jpg?v=1780019920","url":"https:\/\/www.electronicplc.com\/products\/aip571-s2-yokogawa-electrical-transceiver-module","provider":"Electronic PLC","version":"1.0","type":"link"}