{"product_id":"asi533-s00-analog-output-module-yokogawa","title":"ASI533-S00 Analog Output Module YOKOGAWA","description":"\u003cp\u003eConfigured for precision actuator control in CENTUM VP and related process control platforms, the \u003cstrong\u003eYOKOGAWA ASI533-S00\u003c\/strong\u003e (\u003cstrong\u003eASI533\u003c\/strong\u003e Analog Output Module) provides direct physical\/electrical execution of 4-20 mA DC control signals to field-level process hardware.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eASI533-S00\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eYOKOGAWA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003ejapan\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.30 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e282 mm x 210 mm x 20 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003eNot specified\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003e150 mA (5 V DC) \/ 350 mA (24 V DC)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput Channels\u003c\/td\u003e\n\u003ctd\u003e8 channels\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSignal Type\u003c\/td\u003e\n\u003ctd\u003e4-20 mA DC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAccuracy\u003c\/td\u003e\n\u003ctd\u003e+\/- 48 uA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eDCS Process Loop Connectivity\u003c\/h3\u003e\n\u003cp\u003eThe ASI533-S00 module integrates directly into DCS process loops utilizing the 4-20 mA HART loop protocol, enabling intelligent status monitoring of connected valves and actuators. To ensure signal integrity, each of the 8 channels features individual isolation with a withstanding voltage of 1500 V AC between the output loop and internal circuit logic. This robust isolation design prevents electrical noise propagation and ground loops, maintaining the accuracy of the control signal even in high-density process environments.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions (FAQ)\u003c\/h3\u003e\n\u003cp\u003eQ: Does the ASI533-S00 support HART pass-through communication?\u003c\/p\u003e\n\u003cp\u003eA: Yes, the module supports HART communication protocols, allowing for the transmission of device diagnostics and configuration data alongside the primary 4-20 mA control signal. Ensure that the host controller software is configured to recognize the HART frame format.\u003c\/p\u003e\n\u003cp\u003eQ: What is the impact of ambient temperature fluctuations on module accuracy?\u003c\/p\u003e\n\u003cp\u003eA: The module is calibrated for an accuracy of +\/- 48 uA at 23 deg C. The thermal drift is specified at +\/- 16 uA per 10 deg C change in ambient temperature. Ensure the cabinet environment is maintained within stable thermal limits to maximize output precision.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Install the ASI533-S00 via DIN rail or panel mount. Ensure the module orientation allows for unobstructed airflow over the front and rear surfaces to facilitate heat dissipation from the internal power circuitry.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWiring:\u003c\/strong\u003e Connect field devices to the screw terminals. Verify that the total load resistance of the loop remains within 0-750 Ohm at 20 mA or 0-600 Ohm at 23 mA to avoid output saturation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGrounding:\u003c\/strong\u003e Bond the module chassis to the cabinet’s protective earth (PE) bus. This grounding path is mandatory to maintain the 1500 V AC isolation integrity and to provide effective surge protection for the analog output stages.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShielding:\u003c\/strong\u003e Use shielded twisted-pair cabling for all 4-20 mA loops. Terminate cable shields at the designated cabinet grounding point to minimize electromagnetic interference (EMI) and common-mode noise on the analog signals.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Yokogawa","offers":[{"title":"Default Title","offer_id":50361042469116,"sku":"ASI533-S00","price":99.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/9983\/1292\/files\/ASI533-S00.jpg?v=1784510883","url":"https:\/\/www.electronicplc.com\/products\/asi533-s00-analog-output-module-yokogawa","provider":"Electronic PLC","version":"1.0","type":"link"}