{"product_id":"avr10d-a22040-yokogawa-duplexed-v-net-router","title":"AVR10D-A22040 YOKOGAWA Duplexed V net Router","description":"\u003cp\u003eConfigured for deterministic data routing within V net control networks, the \u003cstrong\u003eYOKOGAWA AVR10D-A22040\u003c\/strong\u003e (\u003cstrong\u003eAVR10D\u003c\/strong\u003e Duplexed V net Router) provides direct physical\/electrical execution of inter-subnetwork communication and traffic management across DCS platforms.\u003c\/p\u003e\n\u003ch3\u003eSuffix Breakdown \u0026amp; Model Matrix\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAVR10D\u003c\/strong\u003e: Base model designation for the duplexed V net router assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eA\u003c\/strong\u003e: Denotes the standard hardware revision and chassis format.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e22\u003c\/strong\u003e: Specifies the dual-port V net communication interface configuration.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e040\u003c\/strong\u003e: Identifies the integrated logic firmware version and port-speed compatibility standard.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eAVR10D-A22040\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eYOKOGAWA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003ejapan\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e 3.0 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003eStandard 19-inch Rack-Mount\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e5 deg C to 40 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003eSubject to redundancy loading\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInterface\u003c\/td\u003e\n\u003ctd\u003eDuplexed V net (Dual Port)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eProcess Control and DCS Connectivity\u003c\/h3\u003e\n\u003cp\u003eThe AVR10D-A22040 maintains high-speed data integrity across distributed control stations by utilizing redundant V net communication channels. The router employs hardware-based channel-to-channel isolation to prevent electrical interference propagation between the V net segments and the local control bus. By managing protocol-specific data packets, the router ensures deterministic latency for real-time process control commands. Cold junction compensation (CJC) is not applicable to this router component; however, internal diagnostic buffers continuously monitor bus signal quality to prevent packet loss during heavy network traffic.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: Does the AVR10D-A22040 support hot-swapping in a live V net environment?\u003c\/p\u003e\n\u003cp\u003eA: The duplexed configuration allows for the replacement of a single router unit while the system remains operational, provided the standby unit has completed synchronization and the V net segment is stable.\u003c\/p\u003e\n\u003cp\u003eQ: Is external configuration required for the V net addresses?\u003c\/p\u003e\n\u003cp\u003eA: Yes, network addressing and subnetwork routing tables must be configured via the system engineering station to align the router with the existing V net infrastructure.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eChassis Mounting\u003c\/strong\u003e: Install the unit in a standard control rack. Ensure the mounting brackets are securely fastened to maintain mechanical stability and proper alignment with the V net backplane interface.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEarthing and Shielding\u003c\/strong\u003e: Connect the chassis ground terminal to the instrument earth bus using a low-impedance copper strap. Ensure that all V net communication cables utilize shielded connectors to minimize common-mode noise.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRedundancy Synchronization\u003c\/strong\u003e: Before enabling the duplexed pair, verify that the firmware versions on both router modules match. Power up the modules sequentially to allow for internal diagnostic self-testing and synchronization.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWiring Segregation\u003c\/strong\u003e: Route V net cables through dedicated, non-conductive cable trays, maintaining separation from high-voltage lines to prevent electromagnetic interference (EMI) ingress.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Yokogawa","offers":[{"title":"Default Title","offer_id":49218308604156,"sku":"AVR10D-A22040","price":99.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/9983\/1292\/files\/AVR10D-Q22020.jpg?v=1780624894","url":"https:\/\/www.electronicplc.com\/products\/avr10d-a22040-yokogawa-duplexed-v-net-router","provider":"Electronic PLC","version":"1.0","type":"link"}