{"product_id":"bently-nevada-330500-01-01-velomitor-piezo-velocity-sensor","title":"Bently Nevada 330500-01-01 Velomitor Piezo-Velocity Sensor","description":"\u003cp\u003eThe Bently Nevada 330500-01-01 is a high-performance Velomitor Piezo-velocity sensor designed for the measurement of absolute vibration on bearing housings, machine casings, and structural components. By utilizing advanced piezoelectric accelerometer technology with integrated solid-state electronics, this sensor provides a reliable velocity output without the mechanical wear associated with traditional moving-coil transducers.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSolid-state design with no moving parts for extended service life.\u003c\/li\u003e\n\u003cli\u003eIntegrated electronics allow for mounting in any orientation (vertical, horizontal, or angled).\u003c\/li\u003e\n\u003cli\u003eImmune to mechanical degradation common in older velocity transducer technologies.\u003c\/li\u003e\n\u003cli\u003eStandard 1\/2-20 UNF mounting thread for secure installation.\u003c\/li\u003e\n\u003cli\u003eCSA\/US\/C certified for hazardous area compliance.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eApplications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTurbines:\u003c\/strong\u003e Monitoring absolute bearing housing vibration in steam and gas turbine sets.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompressors and Fans:\u003c\/strong\u003e Ideal for centrifugal and axial compressors, as well as cooling tower blowers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePumps and Motors:\u003c\/strong\u003e Suitable for horizontal and vertical pump trains and electric motor drive systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIndustrial Processing:\u003c\/strong\u003e Widely used in power generation, oil and gas, petrochemical, and steel manufacturing facilities.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003e330500-01-01\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSensitivity\u003c\/td\u003e\n\u003ctd\u003e3.94 mV\/mm\/s (100 mV\/in\/s) +\/- 5%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVelocity Range\u003c\/td\u003e\n\u003ctd\u003e1270 mm\/s (50 in\/s) peak\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAmplitude Linearity\u003c\/td\u003e\n\u003ctd\u003e+\/- 2% to 152 mm\/s (6 in\/s) peak\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting Thread\u003c\/td\u003e\n\u003ctd\u003e1\/2-20 UNF\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eApprovals\u003c\/td\u003e\n\u003ctd\u003eCSA\/US\/C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eInstallation Guidelines\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector Engagement:\u003c\/strong\u003e Secure the 2-pin Mil-C-5015 connector firmly. If a protective boot is utilized, ensure it is seated correctly over the lip above the hex flats.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePolarity:\u003c\/strong\u003e Pin A provides a positive signal relative to Pin B when the sensor case moves toward the connector.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable Management:\u003c\/strong\u003e Maintain a minimum cable bend radius of 38.1 mm (1.5 inches) to prevent internal conductor damage.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSignal Integrity:\u003c\/strong\u003e The sensor supports cable runs up to 305 meters (1,000 feet) without significant signal degradation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHandling:\u003c\/strong\u003e As a precision instrument, handle with care to avoid impact damage to the piezoelectric element. Ensure the mounting surface is clean and flat for accurate vibration transmission.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\u003ch3\u003eWhat is the primary function of the 330500-01-01?\u003c\/h3\u003e\u003cp\u003eThe sensor is designed to measure absolute vibration relative to free space, converting acceleration signals into a velocity output for monitoring bearing housing and structural health.\u003c\/p\u003e\u003ch3\u003eCan this sensor be mounted in any position?\u003c\/h3\u003e\u003cp\u003eYes, because the unit utilizes solid-state electronics and contains no moving parts, it is not position-sensitive and can be installed at any angle.\u003c\/p\u003e\u003ch3\u003eWhat is the significance of the -01-01 suffix?\u003c\/h3\u003e\u003cp\u003eThe first -01 indicates the 1\/2-20 UNF mounting thread configuration, and the second -01 denotes the specific agency approval package (CSA\/US\/C).\u003c\/p\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":50998336684284,"sku":"330500-01-01","price":99.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/9983\/1292\/files\/wm_1_2afe51a6-853f-43f3-9db0-b61ae98553a2.jpg?v=1787164777","url":"https:\/\/www.electronicplc.com\/products\/bently-nevada-330500-01-01-velomitor-piezo-velocity-sensor","provider":"Electronic PLC","version":"1.0","type":"link"}