{"product_id":"csl-pw301-yokogawa-power-supply-new-original-stock","title":"CSL\/PW301 YOKOGAWA Power Supply New \u0026 Original Stock","description":"\u003cp\u003eThe \u003cstrong\u003eYOKOGAWA CSL\/PW301\u003c\/strong\u003e Power Supply Module operates as a dedicated hardware component for power distribution within Yokogawa Centum VP DCS and process analyzer platforms. Configured to accept standardized AC inputs, this module regulates and stabilizes the electrical potential required for system backplane operations and associated control logic.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eCSL\/PW301\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eYokogawa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eJapan\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e3.3 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e10.2 cm x 27.9 cm x 27.9 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput Voltage\u003c\/td\u003e\n\u003ctd\u003e100-120 VAC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput Current\u003c\/td\u003e\n\u003ctd\u003e6 A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput Voltage\u003c\/td\u003e\n\u003ctd\u003e5.1 VDC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput Current\u003c\/td\u003e\n\u003ctd\u003e15 A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eProcess Control and Signal Isolation\u003c\/h3\u003e\n\u003cp\u003eThe CSL\/PW301 facilitates stable voltage rails necessary for process control continuity. The unit incorporates channel-to-channel isolation to prevent ground loops and electrical noise injection into the control bus. Consistent voltage delivery is maintained across varying load conditions to ensure the integrity of the 4-20 mA HART loop protocol utilized by downstream instrumentation. Cold junction compensation (CJC) and precise thermal management are implemented within the power stage to maintain performance accuracy across the operational temperature range.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: Is the CSL\/PW301 compatible with redundant power configurations?\u003c\/p\u003e\n\u003cp\u003eA: Yes, the module is designed for load-sharing in redundant rack setups. Ensure that both modules are synchronized via the backplane and connected to separate power sources to prevent system-wide failure during an input line disturbance.\u003c\/p\u003e\n\u003cp\u003eQ: What is the significance of the 5.1 VDC output?\u003c\/p\u003e\n\u003cp\u003eA: The 5.1 VDC rail is utilized to power the logic-level circuitry and backplane communication processors. This specific voltage level is calibrated to minimize heat dissipation while maintaining signal integrity for high-speed digital communications across the DCS architecture.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eConfirm that the input power source is disconnected before installing the module into the chassis.\u003c\/li\u003e\n\u003cli\u003eVerify that the chassis slot is properly aligned with the module's rear connector pins to avoid physical damage during insertion.\u003c\/li\u003e\n\u003cli\u003eSecure the module using the front-panel fastening hardware to ensure stability and proper electrical contact with the chassis ground.\u003c\/li\u003e\n\u003cli\u003eCheck the output voltage at the backplane terminals post-installation to confirm it remains within the nominal 5.1 VDC range under load.\u003c\/li\u003e\n\u003cli\u003eProvide sufficient ventilation clearance above and below the unit to prevent thermal throttling of the internal voltage regulation components.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Yokogawa","offers":[{"title":"Default Title","offer_id":49136612868348,"sku":"CSL\/PW301","price":99.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/9983\/1292\/files\/CSLPW3011.jpg?v=1779846288","url":"https:\/\/www.electronicplc.com\/products\/csl-pw301-yokogawa-power-supply-new-original-stock","provider":"Electronic PLC","version":"1.0","type":"link"}