{"product_id":"e9716yb-yokogawa-controller-new-original-stock","title":"E9716YB YOKOGAWA Controller | New \u0026 Original Stock","description":"\u003cp\u003eConfigured for precision signal conditioning and distributed data acquisition in DCS network platforms, the \u003cstrong\u003eYOKOGAWA E9716YB\u003c\/strong\u003e (\u003cstrong\u003eE9716YB\u003c\/strong\u003e Industrial Controller) provides direct physical signal processing and I\/O execution. This hardware component manages mixed analog and digital signal streams through integrated Modbus RTU serial communication protocols to facilitate high-speed process feedback loops.\u003c\/p\u003e\n\u003ch3\u003eSuffix Breakdown \u0026amp; Model Matrix\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eE9716YB\u003c\/strong\u003e is a discrete controller unit providing a fixed configuration of input and output channels. There are no variable modular suffixes associated with this specific hardware version. The unit acts as a standalone interface, integrating field-level sensor inputs and relay-based control outputs directly into the host system architecture.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eE9716YB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eYOKOGAWA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eSubject to factory marking\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.65kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003eNot specified\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e-10 deg C to +60 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003eNot specified\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput Type\u003c\/td\u003e\n\u003ctd\u003eAnalog (Thermocouple, RTD) \/ Digital\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput Type\u003c\/td\u003e\n\u003ctd\u003e4-20 mA \/ Digital Relay\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Supply\u003c\/td\u003e\n\u003ctd\u003e24 VDC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCommunication\u003c\/td\u003e\n\u003ctd\u003eModbus RTU\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProtection Class\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eProcess Control and Signal Isolation\u003c\/h3\u003e\n\u003cp\u003eThe module utilizes integrated signal processing stages to maintain measurement accuracy across the connected 4-20 mA loop protocols. To ensure system stability during high-density I\/O operations, the unit supports galvanic isolation paths between channel-to-channel interfaces, preventing cross-channel electrical interference. The Modbus RTU communication interface is physically mapped to internal registers, requiring precise slave ID configuration to facilitate real-time polling from the primary DCS processor.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions (FAQ)\u003c\/h3\u003e\n\u003cp\u003eQ: Can the E9716YB be hot-swapped while the system is powered?\u003c\/p\u003e\n\u003cp\u003eA: No. The unit is designed for fixed mounting and does not support hot-swapping. Ensure the 24 VDC supply is disconnected before insertion or removal from the DIN rail to prevent potential backplane circuit damage.\u003c\/p\u003e\n\u003cp\u003eQ: How is the 4-20 mA loop referenced on the output terminals?\u003c\/p\u003e\n\u003cp\u003eA: The output stage is designed as an active sink\/source configuration. Ensure that the load impedance on the 4-20 mA loop remains within the operational range specified for the DCS input card to prevent signal clipping.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Requirements:\u003c\/strong\u003e Secure the unit to a standard 35 mm DIN rail or designated panel surface. Ensure sufficient clearance (minimum 50 mm) above and below the module for passive cooling airflow to remain within the -10 deg C to +60 deg C operating envelope.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGrounding and Shielding:\u003c\/strong\u003e Terminate all signal cable shields to a dedicated instrumentation ground bus. Keep signal wiring physically separated from high-voltage AC power conduits to minimize electromagnetic interference (EMI) on the analog inputs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTerminal Connections:\u003c\/strong\u003e Utilize ferrules for all stranded wire terminations. Tighten M4 screw terminals according to standard industrial torque specifications to ensure a low-resistance path for the thermocouple and RTD signal circuits.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Yokogawa","offers":[{"title":"Default Title","offer_id":49181345939708,"sku":"E9716YB","price":99.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/9983\/1292\/files\/E9716YB2.jpg?v=1781143670","url":"https:\/\/www.electronicplc.com\/products\/e9716yb-yokogawa-controller-new-original-stock","provider":"Electronic PLC","version":"1.0","type":"link"}