{"product_id":"eb511-10-bus-interface-module-yokogawa","title":"EB511-10 Bus Interface Module Yokogawa","description":"\u003cp\u003eConfigured for high-speed data exchange in CENTUM CS and CENTUM VP control networks, the \u003cstrong\u003eYokogawa EB511-10\u003c\/strong\u003e (\u003cstrong\u003eEB511-10\u003c\/strong\u003e Bus Interface Module) provides direct physical and electrical execution for ER Bus communication between the DCS and integrated field devices.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eEB511-10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eYokogawa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eJapan\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.3 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e2.5 cm (W) x 12.7 cm (D) x 12.7 cm (H)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e0 to 50 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003eDependent on backplane load\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCommunication\u003c\/td\u003e\n\u003ctd\u003eER Bus \/ IEEE802.3 10BASE-2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eYokogawa DCS and Process Control Connectivity\u003c\/h3\u003e\n\u003cp\u003eThe EB511-10 serves as a critical gateway within the DCS architecture, facilitating communication across multiple industrial protocols including FOUNDATION Fieldbus, HART, and Modbus TCP\/IP. The module leverages the IEEE802.3 10BASE-2 physical layer to ensure robust data transfer over the ER bus. Implementation of this interface requires careful adherence to signal impedance standards to maintain channel-to-channel isolation and minimize potential signal degradation within the control network.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: Does the EB511-10 support hot-swapping within the CENTUM system?\u003c\/p\u003e\n\u003cp\u003eA: No. The module is not rated for hot-insertion or hot-removal. The system power must be isolated before performing any maintenance or module replacement to prevent damage to the backplane communication circuitry.\u003c\/p\u003e\n\u003cp\u003eQ: Is external power required for the EB511-10?\u003c\/p\u003e\n\u003cp\u003eA: No. The module is powered directly via the system backplane, ensuring simplified installation within the CENTUM CS\/VP rack architecture.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eEnsure the control rack is clean and free from conductive particulate matter prior to module installation.\u003c\/li\u003e\n\u003cli\u003eAlign the EB511-10 module carefully with the backplane guide rails and verify that the ER bus interface connector is fully seated.\u003c\/li\u003e\n\u003cli\u003eUse the specified 10BASE-2 cabling and proper termination resistors at the ends of the bus segment to prevent signal reflections and data transmission errors.\u003c\/li\u003e\n\u003cli\u003eRoute all communication cables away from high-current power conduits to minimize electromagnetic interference (EMI).\u003c\/li\u003e\n\u003cli\u003eVerify that the module's operating environment remains within the 0 to 50 deg C range to ensure stable performance and prevent premature hardware failure.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Yokogawa","offers":[{"title":"Default Title","offer_id":49243244167420,"sku":"EB511-10","price":99.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/9983\/1292\/files\/EB511-101.jpg?v=1782956036","url":"https:\/\/www.electronicplc.com\/products\/eb511-10-bus-interface-module-yokogawa","provider":"Electronic PLC","version":"1.0","type":"link"}