{"product_id":"ic200dbi001-ge-fanuc-versamax-remote-i-o-network-interface-module","title":"General Electric IC200DBI001 VersaMax DeviceNet Network Interface Unit","description":"\u003cp\u003eThe General Electric IC200DBI001 is a dedicated Remote I\/O Network Interface Unit (NIU) designed for the VersaMax distributed I\/O system. This module functions as a DeviceNet slave, enabling seamless integration of VersaMax I\/O stations into DeviceNet communication networks. It supports efficient data exchange between the host controller and the local I\/O modules, providing a scalable solution for complex automation architectures.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSupports DeviceNet slave communication protocol.\u003c\/li\u003e\n\u003cli\u003eHandles up to 128 bytes of input and 128 bytes of output data.\u003c\/li\u003e\n\u003cli\u003eSupports up to 8 VersaMax I\/O modules per station.\u003c\/li\u003e\n\u003cli\u003eConfigurable data rates of 125 kbps, 250 kbps, and 500 kbps.\u003c\/li\u003e\n\u003cli\u003eIntegrated status indicators for Power, OK, Fault, Module, Network, and Force status.\u003c\/li\u003e\n\u003cli\u003e5-pin open-style connector for standard DeviceNet cabling.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eIC200DBI001\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProtocol\u003c\/td\u003e\n\u003ctd\u003eDeviceNet Slave\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Modules per Station\u003c\/td\u003e\n\u003ctd\u003e8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eI\/O Capacity\u003c\/td\u003e\n\u003ctd\u003e128 bytes input \/ 128 bytes output\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBackplane Current (5V)\u003c\/td\u003e\n\u003ctd\u003e160 mA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBackplane Current (3.3V)\u003c\/td\u003e\n\u003ctd\u003e10 mA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnector Type\u003c\/td\u003e\n\u003ctd\u003e5-pin open-style\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eApplications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eAutomotive manufacturing and vehicle assembly lines.\u003c\/li\u003e\n\u003cli\u003eHeavy industry process optimization including steel and lime production.\u003c\/li\u003e\n\u003cli\u003ePharmaceutical production flow management.\u003c\/li\u003e\n\u003cli\u003ePrecision manufacturing and smart factory connectivity.\u003c\/li\u003e\n\u003cli\u003eMachining center control and real-time data exchange for assembly equipment.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation Guidelines\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe module is designed for DIN-rail mounting; ensure the rail is securely grounded.\u003c\/li\u003e\n\u003cli\u003eConnect the DeviceNet cable to the 5-pin open-style connector; ensure proper polarity.\u003c\/li\u003e\n\u003cli\u003eGrounding: Connect the bare shield wire to Pin 3 of the connector.\u003c\/li\u003e\n\u003cli\u003eTermination: If the NIU is located at either end of the network trunk, install a 121-ohm, 1%, 1\/4W resistor across Pin 2 (CAN_L) and Pin 4 (CAN_H).\u003c\/li\u003e\n\u003cli\u003eAlways power down the system before installing or removing modules to prevent electrical damage.\u003c\/li\u003e\n\u003cli\u003eEnsure adequate ventilation around the module to maintain operating temperature limits.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\u003ch3\u003eWhat is the primary function of the GE IC200DBI001?\u003c\/h3\u003e\u003cp\u003eThe IC200DBI001 is a DeviceNet Network Interface Unit that acts as a slave, allowing up to 8 VersaMax I\/O modules to communicate with a DeviceNet master controller.\u003c\/p\u003e\u003ch3\u003eHow much I\/O data can this unit process?\u003c\/h3\u003e\u003cp\u003eThe unit supports up to 128 bytes of input data and 128 bytes of output data, plus additional status and control words per bus scan.\u003c\/p\u003e\u003ch3\u003eWhat are the supported network speeds?\u003c\/h3\u003e\u003cp\u003eThe module supports standard DeviceNet baud rates of 125 kbps, 250 kbps, and 500 kbps, depending on the bus length.\u003c\/p\u003e","brand":"General Electric","offers":[{"title":"Default Title","offer_id":51006378901756,"sku":"IC200DBI001","price":99.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/9983\/1292\/files\/wm_1_f4c1ab09-abf8-4cc9-966a-dbd8eb216e5d.jpg?v=1787502360","url":"https:\/\/www.electronicplc.com\/products\/ic200dbi001-ge-fanuc-versamax-remote-i-o-network-interface-module","provider":"Electronic PLC","version":"1.0","type":"link"}