{"product_id":"nfpw444-10-s2-yokogawa-power-supply-datasheet-technical-manual","title":"NFPW444-10 S2 YOKOGAWA Power Supply Datasheet \u0026 Technical Manual","description":"\u003cp\u003eThe \u003cstrong\u003eYOKOGAWA NFPW444-10 S2\u003c\/strong\u003e, also cataloged as the \u003cstrong\u003eNFPW444-10\u003c\/strong\u003e Power Supply Module, operates as a dedicated hardware component for power regulation and distribution within Yokogawa DCS control platforms. This module executes the conversion of incoming supply voltage into regulated DC output, maintaining the operational voltage rails required for system backplane logic and associated instrumentation.\u003c\/p\u003e\n\u003ch3\u003eSuffix Breakdown \u0026amp; Model Matrix\u003c\/h3\u003e\n\u003cp\u003eThe model identifier NFPW444-10 S2 designates a specific hardware iteration. The \"S2\" suffix indicates an optimized revision for system backplanes, ensuring mechanical alignment and interface compatibility with standard Yokogawa control bus architectures.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eNFPW444-10 S2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eYokogawa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eJapan\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e1.4 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e5.5 cm x 15.0 cm x 11.2 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e0 deg C to 50 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003eLoad dependent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eProcess Control and Signal Isolation\u003c\/h3\u003e\n\u003cp\u003eThe NFPW444-10 S2 ensures consistent voltage delivery, which is necessary to maintain the integrity of the 4-20 mA HART loop protocol across the control environment. The unit features channel-to-channel isolation to prevent the propagation of common-mode electrical noise or ground loops between control segments. Additionally, the internal thermal management system facilitates cold junction compensation (CJC), providing the electrical stability required for high-precision process measurement and control tasks.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: Does the NFPW444-10 S2 support redundant power supply configurations?\u003c\/p\u003e\n\u003cp\u003eA: Yes, this module supports parallel operation within a redundant power supply chassis. The internal bus circuitry is designed to manage automatic load balancing and failover, provided that both modules are connected to independent power input lines.\u003c\/p\u003e\n\u003cp\u003eQ: How can I verify that the module is operating within nominal parameters?\u003c\/p\u003e\n\u003cp\u003eA: Monitor the status LEDs on the front panel and verify the DC output voltage at the backplane test points using a calibrated multimeter. Any deviation from the nominal output voltage under load may indicate internal component degradation.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eConfirm that the input power source is de-energized before mounting the module to the backplane.\u003c\/li\u003e\n\u003cli\u003eAlign the module with the chassis guide rails and apply firm pressure until the connector pins fully engage with the backplane bus.\u003c\/li\u003e\n\u003cli\u003eTighten the front panel fastening hardware to ensure a low-impedance connection to the chassis protective earth (PE) ground.\u003c\/li\u003e\n\u003cli\u003eVerify the output voltage at the backplane test points using a calibrated multimeter before commissioning the connected I\/O cards.\u003c\/li\u003e\n\u003cli\u003eInspect the wiring connections periodically to ensure terminals remain tight, as vibration in industrial environments can lead to intermittent power delivery.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Yokogawa","offers":[{"title":"Default Title","offer_id":49137463066876,"sku":"NFPW444-10 S2","price":99.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/9983\/1292\/files\/NFPW_444-10.jpg?v=1779846288","url":"https:\/\/www.electronicplc.com\/products\/nfpw444-10-s2-yokogawa-power-supply-datasheet-technical-manual","provider":"Electronic PLC","version":"1.0","type":"link"}