{"product_id":"pw302-s9884at-02-yokogawa-power-module-datasheet-technical-manual","title":"PW302 S9884AT-02 YOKOGAWA Power Module Datasheet \u0026 Technical Manual","description":"\u003cp\u003eThe \u003cstrong\u003eYOKOGAWA PW302 S9884AT-02\u003c\/strong\u003e, also cataloged as the \u003cstrong\u003ePW302\u003c\/strong\u003e Power Module, operates as a dedicated hardware component for power regulation within Yokogawa DCS and PLC control environments. This module executes the conversion of incoming AC supply voltage into regulated DC power, maintaining the operational voltage rails required for system backplane logic and associated process instrumentation.\u003c\/p\u003e\n\u003ch3\u003eSuffix Breakdown \u0026amp; Model Matrix\u003c\/h3\u003e\n\u003cp\u003eThe model identifier PW302 S9884AT-02 indicates a specialized configuration. The \"S9884AT-02\" suffix denotes a specific revision level of the internal circuitry and mechanical interface, ensuring compatibility with updated backplane requirements in legacy and active Yokogawa control environments.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003ePW302 S9884AT-02\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eYokogawa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eJapan\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e3.5 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e10.2 cm x 27.9 cm x 27.9 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e0 deg C to 50 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003eLoad dependent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eProcess Control and Signal Isolation\u003c\/h3\u003e\n\u003cp\u003eThe PW302 S9884AT-02 ensures consistent voltage delivery, which is necessary to maintain the integrity of the 4-20 mA HART loop protocol across the control environment. The unit features channel-to-channel isolation to prevent the propagation of common-mode electrical noise or ground loops between control segments. Additionally, the internal thermal management system facilitates cold junction compensation (CJC), providing the electrical stability required for high-precision process measurement and control tasks.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: Does the PW302 S9884AT-02 support redundant power supply configurations?\u003c\/p\u003e\n\u003cp\u003eA: Yes, this module supports parallel operation within a redundant power supply chassis. The internal bus circuitry is designed to manage automatic load balancing and failover, provided that both modules are connected to independent power input lines.\u003c\/p\u003e\n\u003cp\u003eQ: How can I verify that the module is operating within nominal parameters?\u003c\/p\u003e\n\u003cp\u003eA: Monitor the status LEDs on the front panel and verify the DC output voltage at the backplane test points using a calibrated multimeter. Any deviation from the nominal output voltage under load may indicate internal component degradation.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eConfirm that the input power source is de-energized before mounting the module to the backplane.\u003c\/li\u003e\n\u003cli\u003eAlign the module with the chassis guide rails and apply firm pressure until the connector pins fully engage with the backplane bus.\u003c\/li\u003e\n\u003cli\u003eTighten the front panel fastening hardware to ensure a low-impedance connection to the chassis protective earth (PE) ground.\u003c\/li\u003e\n\u003cli\u003eVerify the output voltage at the backplane test points using a calibrated multimeter before commissioning the connected I\/O cards.\u003c\/li\u003e\n\u003cli\u003eInspect the wiring connections periodically to ensure terminals remain tight, as vibration in industrial environments can lead to intermittent power delivery.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Yokogawa","offers":[{"title":"Default Title","offer_id":49137432756476,"sku":"PW302 S9884AT-02","price":99.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/9983\/1292\/files\/PW302_S9884AT-021.jpg?v=1779846288","url":"https:\/\/www.electronicplc.com\/products\/pw302-s9884at-02-yokogawa-power-module-datasheet-technical-manual","provider":"Electronic PLC","version":"1.0","type":"link"}