{"product_id":"spw481-13-s1-yokogawa-power-supply-new-original-stock","title":"SPW481-13 S1 YOKOGAWA Power Supply New \u0026 Original Stock","description":"\u003cp\u003eThe \u003cstrong\u003eYOKOGAWA SPW481-13 S1\u003c\/strong\u003e, also cataloged as the \u003cstrong\u003eSPW481\u003c\/strong\u003e Power Supply Module, operates as a dedicated hardware component for power regulation and distribution within Yokogawa DCS platforms. This module executes the conversion of incoming supply voltage into regulated DC output, maintaining the operational stability required for backplane-mounted control cards and integrated field instrumentation.\u003c\/p\u003e\n\u003ch3\u003eSuffix Breakdown \u0026amp; Model Matrix\u003c\/h3\u003e\n\u003cp\u003eThe model identifier SPW481-13 S1 designates a specific hardware iteration. The \"S1\" suffix indicates a revised board layout and component selection optimized for current-generation Yokogawa DCS chassis, ensuring mechanical form factor compatibility and standard electrical interface matching.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eSPW481-13 S1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eYokogawa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eJapan\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.9 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e5.1 cm x 20.3 cm x 14.6 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e0 deg C to 50 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003eLoad dependent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eProcess Control and Signal Isolation\u003c\/h3\u003e\n\u003cp\u003eThe SPW481-13 S1 facilitates stable voltage rails necessary for process control continuity. The unit incorporates channel-to-channel isolation to prevent ground loops and electrical noise injection into the control bus. Consistent voltage delivery is maintained across varying load conditions to ensure the integrity of the 4-20 mA HART loop protocol utilized by downstream instrumentation. Cold junction compensation (CJC) and precise thermal management are implemented within the power stage to maintain performance accuracy across the operational temperature range.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: Is the SPW481-13 S1 compatible with redundant power configurations?\u003c\/p\u003e\n\u003cp\u003eA: Yes, this module supports load-sharing configurations when installed in redundant pairs within a compatible Yokogawa chassis. Ensure both modules are active and connected to independent power sources to maintain zero-switchover time in the event of a single module failure.\u003c\/p\u003e\n\u003cp\u003eQ: Does the module support hot-swapping?\u003c\/p\u003e\n\u003cp\u003eA: The SPW481-13 S1 supports hot-swapping within properly configured backplanes. Ensure that the associated rack is equipped with protective circuitry to handle transient surges during the engagement of the backplane connector pins.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eConfirm that the input power source is de-energized before mounting the module into the chassis.\u003c\/li\u003e\n\u003cli\u003eAlign the module with the chassis guide rails and apply firm pressure until the connector pins fully engage with the backplane bus.\u003c\/li\u003e\n\u003cli\u003eSecure the module using the front-panel fastening hardware to ensure stability and proper electrical contact with the chassis ground.\u003c\/li\u003e\n\u003cli\u003eCheck the output voltage at the backplane terminals post-installation to confirm it remains within the nominal range under load.\u003c\/li\u003e\n\u003cli\u003eProvide sufficient ventilation clearance above and below the unit to prevent thermal throttling of the internal voltage regulation components.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Yokogawa","offers":[{"title":"Default Title","offer_id":49137426596092,"sku":"SPW481-13-S1","price":99.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/9983\/1292\/files\/SPW481-13-S12.jpg?v=1779846288","url":"https:\/\/www.electronicplc.com\/products\/spw481-13-s1-yokogawa-power-supply-new-original-stock","provider":"Electronic PLC","version":"1.0","type":"link"}