{"product_id":"vi701-s1-yokogawa-interface-card-new-original-stock","title":"VI701 S1 Yokogawa Interface Card | New \u0026 Original Stock","description":"\u003cp\u003eThe \u003cstrong\u003eYokogawa VI701 S1\u003c\/strong\u003e, also cataloged as the \u003cstrong\u003eVI701 S1\u003c\/strong\u003e Interface Card, operates as a dedicated hardware component for facilitating high-speed data exchange and network synchronization within distributed control system platforms. This card serves as the primary communication interface utilized to execute data routing and node-to-node signal verification across Yokogawa CENTUM network platforms.\u003c\/p\u003e\n\u003ch3\u003eSuffix Breakdown \u0026amp; Model Matrix\u003c\/h3\u003e\n\u003cp\u003eThe VI701 S1 model designation identifies the interface card revision optimized for specific bus timing requirements. The \"S1\" suffix indicates a hardware configuration tailored for enhanced data throughput and compatibility with revised system backplane communication standards compared to the baseline unit.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eVI701 S1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eYokogawa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eJapan\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.18 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e2.2 cm x 18.1 cm x 12.7 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e0 to 60 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003e3 W (typical)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInterface Type\u003c\/td\u003e\n\u003ctd\u003eSystem Communication Bus\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eDCS Process Control Features\u003c\/h3\u003e\n\u003cp\u003eThe VI701 S1 integrates into the DCS architecture to support deterministic communication protocols, minimizing latencies in data packet delivery. The module utilizes channel-to-channel isolation to decouple the internal communication bus from external field-interface signals, preventing noise propagation from signal lines. Its internal processing architecture supports firmware flash compatibility, allowing for updates to accommodate evolving protocol requirements within the CENTUM infrastructure while maintaining high-speed network reliability.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: Is the VI701 S1 compatible with the standard VI701 slot configuration?\u003c\/p\u003e\n\u003cp\u003eA: Yes, the S1 version is designed for direct physical and logical compatibility with standard interface card slots in the control rack, provided the system firmware supports the S1 revision.\u003c\/p\u003e\n\u003cp\u003eQ: What is the procedure for verifying successful data synchronization after installation?\u003c\/p\u003e\n\u003cp\u003eA: After installation, observe the diagnostic LED status on the front panel to confirm a steady link state and verify the communication handshake within the system maintenance utility.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003ePower down the controller rack or isolate the communication bus before removing or installing the interface card to prevent backplane signal corruption.\u003c\/li\u003e\n\u003cli\u003eAlign the card with the guide rails in the control cabinet to ensure the backplane connector pins seat evenly without stress or misalignment.\u003c\/li\u003e\n\u003cli\u003eTighten the front panel retaining screws to ensure proper grounding of the card chassis to the cabinet frame.\u003c\/li\u003e\n\u003cli\u003eRoute communication cables through the dedicated signal ducting, keeping them at least 150 mm away from high-voltage AC or inductive load power wiring.\u003c\/li\u003e\n\u003cli\u003eVerify that all external cable shields are properly terminated at the designated cabinet ground point to prevent induced electromagnetic interference on the interface lines.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Yokogawa","offers":[{"title":"Default Title","offer_id":49155706421500,"sku":"VI701 S1","price":99.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/9983\/1292\/files\/VI7012.jpg?v=1780450865","url":"https:\/\/www.electronicplc.com\/products\/vi701-s1-yokogawa-interface-card-new-original-stock","provider":"Electronic PLC","version":"1.0","type":"link"}