{"product_id":"yokogawa-acg10s-f2123-communication-gateway-unit","title":"Yokogawa ACG10S-F2123 Communication Gateway Unit","description":"\u003cp\u003eConfigured for high-performance data exchange in distributed control environments, the \u003cstrong\u003eYokogawa ACG10S-F2123\u003c\/strong\u003e (\u003cstrong\u003eACG10S-F2123\u003c\/strong\u003e Communication Gateway Unit) provides direct physical and electrical execution of inter-subsystem data routing.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eACG10S-F2123\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eYokogawa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eJapan\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003eNot Specified\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003eNot Specified\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e-25 deg C to +60 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003eNot Specified\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProtocols\u003c\/td\u003e\n\u003ctd\u003eEthernet, Frame Mode\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRedundancy\u003c\/td\u003e\n\u003ctd\u003eDual-redundant V-net\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Supply\u003c\/td\u003e\n\u003ctd\u003eStandard AC Voltage\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eProcess Control Connectivity\u003c\/h3\u003e\n\u003cp\u003eThe ACG10S-F2123 integrates into DCS architectures by facilitating deterministic communication paths via its dual-redundant V-net interfaces. The unit utilizes channel-to-channel isolation to prevent signal degradation and maintain data integrity during high-load throughput between disparate subsystems. Cold junction compensation (CJC) and internal signal processing are optimized for long-distance wide-area communication, ensuring stability under varied environmental conditions. The gateway maintains strict protocol adherence to minimize communication latency during critical system state transitions.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: Does the ACG10S-F2123 support hot-swapping during active network communication?\u003c\/p\u003e\n\u003cp\u003eA: Hot-swapping is governed by the specific chassis backplane configuration; confirm that the V-net bus is in a safe-to-update state to prevent link disruption or data packet loss during module removal or installation.\u003c\/p\u003e\n\u003cp\u003eQ: How is the dual-redundant V-net configuration synchronized?\u003c\/p\u003e\n\u003cp\u003eA: Synchronization is managed by the internal hardware logic of the gateway, which monitors the link status of both redundant channels simultaneously, allowing for seamless failover if one path experiences high bit-error rates or physical layer failure.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eMount the unit in a designated industrial cabinet, ensuring adequate clearance for thermal dissipation within the specified -25 deg C to +60 deg C range.\u003c\/li\u003e\n\u003cli\u003eConnect the dual V-net cables to the respective primary and secondary communication ports; ensure locking mechanisms are engaged to prevent vibration-induced disconnects.\u003c\/li\u003e\n\u003cli\u003eVerify that the AC power input is within the specified nominal range before energizing the module.\u003c\/li\u003e\n\u003cli\u003eEnsure the Ethernet shielding is grounded at the designated chassis ground point to mitigate common-mode noise and surge events.\u003c\/li\u003e\n\u003cli\u003ePerform a link test after physical installation to verify communication stability and redundancy health status on the DCS monitoring terminal.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Yokogawa","offers":[{"title":"Default Title","offer_id":49221192745212,"sku":"ACG10S-F2123","price":99.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/9983\/1292\/files\/AAV141-S00_S2.jpg?v=1782263745","url":"https:\/\/www.electronicplc.com\/products\/yokogawa-acg10s-f2123-communication-gateway-unit","provider":"Electronic PLC","version":"1.0","type":"link"}