{"product_id":"yokogawa-alp111-s00-s1-communication-module","title":"Yokogawa ALP111-S00 S1 Communication Module","description":"\u003cp\u003eConfigured for high-speed protocol conversion and data integration in CENTUM VP control networks, the \u003cstrong\u003eYokogawa ALP111-S00 S1\u003c\/strong\u003e (\u003cstrong\u003eALP111-S00 S1\u003c\/strong\u003e Communication Module) provides direct physical signal bridging between third-party industrial subsystems and the centralized control platform.\u003c\/p\u003e\n\u003ch3\u003eSuffix Breakdown \u0026amp; Model Matrix\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eALP111: Base communication module identifier.\u003c\/li\u003e\n\u003cli\u003eS00: Standard hardware processing version for generic serial or fieldbus integration.\u003c\/li\u003e\n\u003cli\u003eS1: Firmware support variant for specific communication protocol mapping within the CENTUM VP environment.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eALP111-S00 S1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eYokogawa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eJapan\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.6 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e5 cm x 13 cm x 15 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e-10 deg C to 60 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003eBackplane powered (5 VDC)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBus Type\u003c\/td\u003e\n\u003ctd\u003eField-protocol communication bus\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eChannel-to-Channel Isolation and Data Acquisition\u003c\/h3\u003e\n\u003cp\u003eThe ALP111-S00 S1 module incorporates galvanic isolation to decouple external device communication circuits from the internal station bus backplane. This isolation is necessary to prevent ground-loop interference from affecting the timing-sensitive data exchange protocols managed by the module. The processor executes real-time data polling, providing a consistent update rate for non-native field devices connected to the CENTUM VP architecture.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: Can the ALP111-S00 S1 module perform protocol translation without a dedicated engineering station configuration?\u003c\/p\u003e\n\u003cp\u003eA: No, the module requires specific configuration via the engineering station to define the communication parameters, data mapping, and protocol-specific timings. Without this configuration, the module cannot establish communication with the target field device.\u003c\/p\u003e\n\u003cp\u003eQ: How does the module handle communication timeout errors from connected sub-devices?\u003c\/p\u003e\n\u003cp\u003eA: Upon detecting a communication timeout, the module sets a diagnostic bit in the control system database, allowing operators to identify the specific communication channel and device that has lost connection. The module maintains the last known good value or transitions to a pre-defined fail-safe state, depending on the station-level configuration.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eVerify that the I\/O rack backplane slot is free of dust or metallic debris before installing the module to prevent electrical shorting.\u003c\/li\u003e\n\u003cli\u003eAlign the module chassis with the guide rails and press firmly to ensure the rear pins are fully seated into the backplane receptacle.\u003c\/li\u003e\n\u003cli\u003eSecure the module using the built-in locking screws; ensure they are tightened to the specified torque to maintain structural integrity and shield ground continuity.\u003c\/li\u003e\n\u003cli\u003eRoute communication cables through designated low-voltage conduits, maintaining distance from power cabling to prevent electromagnetic crosstalk.\u003c\/li\u003e\n\u003cli\u003ePerform a communication link check after initialization to ensure that the protocol settings align with the target field device configuration.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Yokogawa","offers":[{"title":"Default Title","offer_id":49219738632444,"sku":"ALP111-S00 S1","price":99.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/9983\/1292\/files\/ALP111-S00_S11.jpg?v=1782177848","url":"https:\/\/www.electronicplc.com\/products\/yokogawa-alp111-s00-s1-communication-module","provider":"Electronic PLC","version":"1.0","type":"link"}