{"product_id":"yokogawa-nfai841-s00-s2-analog-input-module","title":"YOKOGAWA NFAI841-S00 S2 Analog Input Module","description":"\u003cp\u003eThe \u003cstrong\u003eYOKOGAWA NFAI841-S00 S2\u003c\/strong\u003e, also cataloged as the \u003cstrong\u003eNFAI841\u003c\/strong\u003e Analog Input Module, operates as a dedicated hardware component for multi-range analog signal acquisition within CENTUM CS 3000 distributed control system (DCS) architectures.\u003c\/p\u003e\n\u003ch3\u003eSuffix Breakdown \u0026amp; Model Matrix\u003c\/h3\u003e\n\u003cp\u003eThe NFAI841-S00 S2 utilizes a standardized suffix configuration for hardware version control. The -S00 designator identifies the module as a base configuration high-density input unit, while the S2 suffix signifies the second hardware iteration, ensuring compatibility with updated system backplane communication protocols and electromagnetic compliance standards.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eNFAI841-S00 S2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eYOKOGAWA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eJapan\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.35kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e110 mm x 35 mm x 100 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e-20 deg C to 60 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003e2.5 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput Channels\u003c\/td\u003e\n\u003ctd\u003e8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput Signal Range\u003c\/td\u003e\n\u003ctd\u003e+\/- 10 V, 0 to 20 mA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput Impedance\u003c\/td\u003e\n\u003ctd\u003e10 M Ohm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eA\/D Conversion\u003c\/td\u003e\n\u003ctd\u003e16-bit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSampling Rate\u003c\/td\u003e\n\u003ctd\u003e50 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eChannel Isolation and Signal Processing\u003c\/h3\u003e\n\u003cp\u003eThe NFAI841-S00 S2 is engineered to process both voltage and current inputs with high precision. In DCS environments, the module's high input impedance of 10 M Ohm for voltage signals minimizes loading effects on field instrumentation. To maintain signal integrity, proper shielding and grounding are required to mitigate common-mode noise, especially when integrating the module into control loops that utilize the 4-20 mA standard or bipolar voltage signals.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: Does the NFAI841-S00 S2 support hot-swapping?\u003c\/p\u003e\n\u003cp\u003eA: The module is designed for standard DCS rack integration. Hot-swapping is generally supported provided the DCS system configuration is updated to handle module removal or insertion; however, operators must confirm system-specific power-up sequences to prevent bus communication disruptions.\u003c\/p\u003e\n\u003cp\u003eQ: Can this module measure 4-20 mA signals directly?\u003c\/p\u003e\n\u003cp\u003eA: Yes. The 0 to 20 mA input range is designed to accommodate standard 4-20 mA process signals. The module provides 16-bit resolution, allowing for high-precision digital representation of the measured current loop.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eRack Insertion: Ensure the module is seated correctly in the CENTUM CS 3000 field control unit (FCU) base. Align the guide pins and secure the module to the backplane to prevent intermittent contact.\u003c\/li\u003e\n\u003cli\u003eWiring Termination: Utilize shielded twisted-pair cabling for all input connections. Terminate the shield at the cabinet's designated grounding bar to maintain the module's noise immunity.\u003c\/li\u003e\n\u003cli\u003eImpedance Matching: Verify the input source impedance to ensure compatibility with the module's 10 M Ohm input stage for voltage measurements, preventing signal attenuation.\u003c\/li\u003e\n\u003cli\u003eThermal Management: Ensure the installation site adheres to the -20 deg C to 60 deg C temperature range. Avoid blocking airflow in the cabinet to maintain convective cooling and operational stability.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Yokogawa","offers":[{"title":"Default Title","offer_id":49235791151356,"sku":"NFAI841-S00 S2","price":99.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/9983\/1292\/files\/NFAI841-S00_S21.jpg?v=1782781501","url":"https:\/\/www.electronicplc.com\/products\/yokogawa-nfai841-s00-s2-analog-input-module","provider":"Electronic PLC","version":"1.0","type":"link"}