انتقل إلى معلومات المنتج
1 ل 3

Allen-Bradley 1788-CN2FF ControlNet to Foundation Fieldbus Linking Device

Allen-Bradley 1788-CN2FF ControlNet to Foundation Fieldbus Linking Device

Description

The Allen-Bradley 1788-CN2FF is a high-performance linking device designed to bridge ControlNet networks with Foundation Fieldbus H1 segments. This module facilitates seamless communication and data exchange between the two protocols,...

15 يشاهد الناس هذا الآن

التوافرالكمية المتبقية: 1

رمز المنتج: 1788-CN2FF
بائع: Allen-Bradley

الشحن والإرجاع

توصيل موثوق به في جميع أنحاء العالم

  • شركات الشحن: يتم الشحن عبر DHL أو FedEx أو UPS أو USPS .
  • الشحن: تتم معالجة الطلبات خلال يوم عمل واحد إلى يومين، ويتم شحنها خلال 3 إلى 5 أيام عمل .
  • التتبع: يتم توفير تفاصيل التتبع الكاملة عبر البريد الإلكتروني عند الشحن.

ضمان استرداد الأموال خلال 30 يومًا

  • الضمان: فترة إرجاع لمدة 30 يومًا للمنتجات المتوفرة في المخزون والمغلفة من المصنع.
  • الشروط: يجب أن تكون المنتجات غير مفتوحة وغير مستخدمة وفي عبوتها الأصلية.
  • الأصالة: نضمن أن تكون الأجهزة أصلية 100% .

هل تحتاج إلى مزيد من التفاصيل؟ اقرأ سياسة الشحن وسياسة الاسترداد الكاملة.

الأصالة والضمان

  • ضمان أصلي: نحن نوفر فقط قطع غيار أصلية 100%، جديدة تمامًا، ومغلقة من المصنع .
  • تغطية كاملة: كل مكون مدعوم بضمان شامل لمدة 12 شهرًا من تاريخ الشراء.
  • إمكانية التتبع: جميع المنتجات تأتي مع وثائق المصنع الأصلية والملحقات اللازمة للامتثال الكامل للمعايير الصناعية.

الدعم الفني والتوريد

  • مساعدة الخبراء: يقدم فريقنا الفني استشارات مجانية لمساعدتك في التحقق من التوافق مع أنظمة DCS و PLC.
  • مصادر القطع النادرة: متخصصون في المكونات القديمة والتي يصعب العثور عليها من Allen-Bradley و Siemens و ABB و HIMA وغيرها.
  • للاستفسارات المتعلقة بالكميات الكبيرة: تواصلوا معنا على pambo@5gplc.com للحصول على أسعار الكميات الكبيرة أو عروض أسعار المشاريع المخصصة.
عرض تفاصيل المنتج الكاملة

Description

The Allen-Bradley 1788-CN2FF is a high-performance linking device designed to bridge ControlNet networks with Foundation Fieldbus H1 segments. This module facilitates seamless communication and data exchange between the two protocols, allowing for the integration of Fieldbus-enabled field devices into a ControlNet-based control architecture.

Features

  • Protocol Conversion: Enables transparent communication between ControlNet and Foundation Fieldbus H1 networks.
  • Power Requirements: Operates on a standard 11-30 VDC power supply.
  • Mounting: Designed for standard DIN-rail installation, ensuring space-efficient integration into control cabinets.
  • Connectivity: Equipped with 9-pin Sub-D connectors for reliable network interfacing.
  • Robust Design: Built to withstand typical industrial environments with specified vibration and temperature tolerances.

Technical Specifications

Product Model 1788-CN2FF
Device Type ControlNet to Fieldbus Linking Device
Input Voltage 11-30 VDC
Operating Temperature 0 to 60 degC (32 to 140 degF)
Storage Temperature 0 to 60 degC (32 to 140 degF)
Relative Humidity 5 to 95% non-condensing
Vibration Rating 0.5 g @ 10 to 500 Hz

Installation Guidelines

  • Ensure the power supply is disconnected before installing or removing the module from the DIN rail.
  • Verify that the operating environment remains within the specified temperature range (0 to 60 degC) and humidity limits.
  • Use appropriate shielded cabling for both ControlNet and Fieldbus connections to minimize electromagnetic interference (EMI).
  • Ensure the module is securely snapped onto the DIN rail and that all 9-pin Sub-D connectors are fully seated and tightened.
  • Maintain adequate clearance around the module to allow for proper airflow and cooling.

FAQ

What is the primary function of the 1788-CN2FF?

The 1788-CN2FF acts as a bridge, allowing a ControlNet network to communicate with and control Foundation Fieldbus H1 devices, effectively integrating disparate network segments into a unified control system.

Is this device suitable for high-vibration environments?

The module is rated for 0.5 g vibration at 10 to 500 Hz. It is intended for standard industrial cabinet mounting; if your application exceeds these vibration specifications, additional shock-absorbing mounting hardware may be required.