Description

The ABB NDNA-02 is a fieldbus adapter module designed to provide seamless connectivity between ABB drives and a DeviceNet industrial network. This module facilitates high-speed communication, allowing for the integration of drive parameters, control signals, and status monitoring into a centralized DeviceNet control architecture. As a dedicated communication interface, it enables efficient data exchange between the drive and the PLC or master controller.

Features

• Provides DeviceNet fieldbus connectivity for ABB drive systems.
• Supports standard DeviceNet protocol communication for industrial automation.
• Compact design for integration within the drive control section.
• Reliable data transfer for drive control, monitoring, and parameter configuration.
• Operating voltage: 24VDC.
• Power consumption: 3W.

Technical Specifications

Installation Guidelines

• Ensure the drive is completely powered down and the DC bus capacitors have discharged before installing or removing the NDNA-02 module.
• Handle the module using proper ESD (Electrostatic Discharge) precautions to prevent damage to internal electronic components.
• Insert the module into the designated option slot on the drive control board, ensuring proper alignment with the connector pins.
• Secure the module using the provided mounting hardware to ensure vibration resistance and proper grounding.
• Use shielded twisted-pair cable for the DeviceNet network connection to minimize EMI interference.
• Verify that the network termination resistors are correctly installed at both ends of the DeviceNet trunk line.

FAQ

Is the NDNA-02 module still in production?

No, the NDNA-02 has been discontinued by the manufacturer. Please refer to the NDNA-02-KIT (3AUA489002B5047) for replacement or spare part requirements.

What is the primary function of this module?

The NDNA-02 acts as a communication gateway, allowing an ABB drive to function as a slave device on a DeviceNet network, enabling remote control and monitoring via the fieldbus.