انتقل إلى معلومات المنتج
1 ل 3

AIP504-10 S1 Yokogawa V-NET Coupler Module New & Original Stock

AIP504-10 S1 Yokogawa V-NET Coupler Module New & Original Stock

Configured for high-speed network signal bridging in CENTUM VP systems, the Yokogawa AIP504-10 S1 (AIP504 V-NET Coupler Module) provides direct physical execution of data encapsulation and transmission between control network...

21 يشاهد الناس هذا الآن

التوافرالكمية المتبقية: 99

رمز المنتج: AIP504-10
بائع: Yokogawa
Related Series:

الشحن والإرجاع

توصيل موثوق به في جميع أنحاء العالم

  • شركات الشحن: يتم الشحن عبر DHL أو FedEx أو UPS أو USPS .
  • الشحن: تتم معالجة الطلبات خلال يوم عمل واحد إلى يومين، ويتم شحنها خلال 3 إلى 5 أيام عمل .
  • التتبع: يتم توفير تفاصيل التتبع الكاملة عبر البريد الإلكتروني عند الشحن.

ضمان استرداد الأموال خلال 30 يومًا

  • الضمان: فترة إرجاع لمدة 30 يومًا للمنتجات المتوفرة في المخزون والمغلفة من المصنع.
  • الشروط: يجب أن تكون المنتجات غير مفتوحة وغير مستخدمة وفي عبوتها الأصلية.
  • الأصالة: نضمن أن تكون الأجهزة أصلية 100% .

هل تحتاج إلى مزيد من التفاصيل؟ اقرأ سياسة الشحن وسياسة الاسترداد الكاملة.

الأصالة والضمان

  • ضمان أصلي: نحن نوفر فقط قطع غيار أصلية 100%، جديدة تمامًا، ومغلقة من المصنع .
  • تغطية كاملة: كل مكون مدعوم بضمان شامل لمدة 12 شهرًا من تاريخ الشراء.
  • إمكانية التتبع: جميع المنتجات تأتي مع وثائق المصنع الأصلية والملحقات اللازمة للامتثال الكامل للمعايير الصناعية.

الدعم الفني والتوريد

  • مساعدة الخبراء: يقدم فريقنا الفني استشارات مجانية لمساعدتك في التحقق من التوافق مع أنظمة DCS و PLC.
  • مصادر القطع النادرة: متخصصون في المكونات القديمة والتي يصعب العثور عليها من Allen-Bradley و Siemens و ABB و HIMA وغيرها.
  • للاستفسارات المتعلقة بالكميات الكبيرة: تواصلوا معنا على pambo@5gplc.com للحصول على أسعار الكميات الكبيرة أو عروض أسعار المشاريع المخصصة.
عرض تفاصيل المنتج الكاملة

Configured for high-speed network signal bridging in CENTUM VP systems, the Yokogawa AIP504-10 S1 (AIP504 V-NET Coupler Module) provides direct physical execution of data encapsulation and transmission between control network segments.

Hardware Specifications

Parameter Specification
Model AIP504-10 S1
Brand Yokogawa
Origin Japan
Weight 0.7 kg
Dimensions 12.8 cm x 12.8 cm x 6.2 cm
Operating Temp 0 deg C to 50 deg C
Power Consumption 24 VDC
Interface V-NET

DCS Process Control & Data Integrity

The AIP504-10 S1 architecture maintains strict channel-to-channel isolation to prevent electrical noise propagation across the V-NET interface. As a primary communication gateway, this module facilitates FOUNDATION Fieldbus and RS-485 signal mapping, ensuring deterministic data transfer within the DCS backplane. The unit employs cold junction compensation (CJC) logic for integrated signal processing and utilizes robust buffer registers to manage packet synchronization during high-traffic polling cycles.

Frequently Asked Questions

Q: Can the AIP504-10 S1 be replaced while the system is under power?

A: No, this module does not support hot-swap functionality. Power must be isolated from the specific backplane slot before removal to prevent potential damage to the internal bus interface pins.

Q: How should the module be configured for V-NET network integration?

A: Ensure that the network cable is properly shielded and that termination resistors are matched to the segment impedance. Use only manufacturer-specified cabling to prevent signal attenuation and collision errors on the 10BASE-5 media.

Field Installation Guidelines

  • Mount the module vertically within the system cabinet to facilitate optimal thermal dissipation, maintaining the ambient temperature between 0 deg C and 50 deg C.
  • Verify the 24 VDC power supply voltage at the terminal block is regulated and filtered to prevent erratic synchronization behavior or memory errors.
  • Route communication cables in separate cable ducts from high-voltage power lines to mitigate electromagnetic interference.
  • Ensure all terminal screws are tightened to the specified torque to guarantee mechanical stability and consistent electrical contact under high-vibration conditions.