The Bently Nevada 330102-00-50-10-01-05 is a high-performance 3300 XL 8 mm proximity probe designed for critical machinery monitoring. As a core component of the 3300 XL transducer system, this probe provides precise, non-contact measurement of radial vibration, axial position, and speed in industrial rotating equipment.

Features

• System Compatibility: Fully compatible with Bently Nevada 3300 XL Proximitor sensors and extension cables, allowing for complete interchangeability without the need for individual component calibration.
• Robust Design: Features a 3/8-24 UNF thread with integrated armor for enhanced mechanical protection in demanding industrial environments.
• Agency Approvals: Certified for hazardous locations including CSA, ATEX, and IECEx standards.
• Advanced Performance: Complies with API 670 standards for linear range, accuracy, and temperature stability.

Applications

• Steam and gas turbines in power generation facilities.
• Centrifugal and reciprocating compressors in oil and gas processing.
• High-capacity industrial motors and generators.
• Critical process pumps in chemical and manufacturing plants.

Technical Specifications

Installation Guidelines

• Initial Gapping: Rotate the probe into the mounting bracket while monitoring the DC voltage output from the Proximitor sensor. A standard gap of 1.27 mm (50 mils) typically corresponds to a -10.0 Vdc output.
• Torque Requirements: Tighten the probe case to a recommended torque of 68 N-m (50 ft-lb) to ensure stability.
• Handling: Ensure the probe tip remains free of contaminants and avoid mechanical shock to the ceramic tip.
• Cable Routing: Use shielded cabling and route away from high-EMI sources to maintain signal integrity.

FAQ

What is the primary function of the 330102-00-50-10-01-05?

This probe is used to measure radial vibration and axial displacement in rotating machinery, providing essential data for condition monitoring and predictive maintenance systems.

Is this probe interchangeable with other 3300 XL components?

Yes, the 3300 XL system is designed for total component interchangeability, meaning probes, extension cables, and Proximitor sensors can be replaced without requiring bench calibration.

What is the linear range of this transducer system?

The system provides a linear range of approximately 2.0 mm (80 mils), starting from about 0.25 mm (10 mils) from the target.