Description

The General Electric IC200CHS002D is a box-style I/O carrier designed for the VersaMax PLC series. This carrier provides the necessary physical interface and electrical connection points for mounting and wiring VersaMax I/O modules, facilitating reliable signal distribution and power management within an industrial automation system.

Features

• Integrated terminal design for efficient field wiring.
• Supports 36 box-style terminals for high-density I/O configurations.
• Designed for standard DIN rail mounting in horizontal orientations.
• Rated for operation up to 264 VAC with transient voltage protection up to 300 VAC.
• Supports a per-point current rating of 2 Amps and a total segment current capacity of 8 Amps.

Technical Specifications

Installation Guidelines

• Ensure the DIN rail is securely mounted and grounded before installing the carrier.
• Maintain a minimum clearance of 2 inches (5.1 cm) at the top and bottom, and 1 inch (2.54 cm) on the sides to ensure adequate ventilation and access.
• Verify that power is disconnected from the system before inserting or removing any I/O modules from the carrier.
• Use appropriate wire gauges (AWG 14-22) and ensure terminals are tightened to specified torque to prevent loose connections and signal interference.
• Route signal cables away from high-voltage power lines and sources of electromagnetic interference (EMI) to maintain signal integrity.

FAQ

What is the primary function of the IC200CHS002D?

The IC200CHS002D acts as a base carrier for VersaMax I/O modules, providing the mechanical mounting surface and the electrical terminal blocks required to connect field devices to the PLC system.

Can this carrier be mounted vertically?

The IC200CHS002D is designed for horizontal mounting. Please refer to the VersaMax system documentation for specific derating requirements if alternative orientations are necessary.

What is the maximum wire size supported by the terminals?

The terminals support single wire connections from AWG 14 to AWG 22, or dual wire connections using AWG 18 wire.