• Bently Nevada 21747-040-00
  • Bently Nevada 21747-040-00
  • Bently Nevada 21747-040-00
1 3

Bently Nevada 21747-040-00 Extension Cable

Bently Nevada 21747-040-00 Extension Cable

Description

The Bently Nevada 21747-040-00 is a 4-meter extension cable designed for use with Bently Nevada 7200 Series 5 mm and 8 mm Proximity Transducer Systems. This component provides the critical...

26 la gente está viendo esto ahora mismo

Disponibilidad: En existencias

SKU: 21747-040-00
Proveedora: Bently Nevada
tipo: Proximity Probe Extension Cable
Related Series:

Envíos y devoluciones

Entrega confiable a nivel mundial

  • Transportistas: Envíos a través de DHL, FedEx, UPS o USPS .
  • Envío: Los pedidos se procesan en 1-2 días hábiles y se envían dentro de 3-5 días hábiles .
  • Seguimiento: Detalles completos de seguimiento proporcionados por correo electrónico después del envío.

Garantía de devolución de dinero de 30 días

  • Garantía: período de devolución de 30 días para productos en stock y sellados de fábrica.
  • Condición: Los artículos deben estar sin abrir, sin usar y en su embalaje original.
  • Autenticidad: Garantizamos hardware 100% original y auténtico.

¿Necesitas más información? Consulta nuestra Política de envíos y reembolsos completa.

Autenticidad y garantía

  • Garantía genuina: Suministramos únicamente piezas de automatización industrial 100% originales, nuevas y selladas de fábrica .
  • Cobertura total: cada componente está respaldado por una garantía integral de 12 meses a partir de la fecha de compra.
  • Trazabilidad: Todos los productos se entregan con documentación original de fábrica y accesorios para un pleno cumplimiento industrial.

Soporte técnico y abastecimiento

  • Asistencia de expertos: Nuestro equipo técnico ofrece consulta gratuita para ayudarle a verificar la compatibilidad de los sistemas DCS y PLC.
  • Abastecimiento de piezas raras: nos especializamos en componentes obsoletos y difíciles de encontrar de Allen-Bradley, Siemens, ABB, HIMA y más.
  • Consultas al por mayor: contáctenos en pambo@5gplc.com para obtener precios por volumen o cotizaciones de proyectos personalizados.
Ver todos los detalles

Description

The Bently Nevada 21747-040-00 is a 4-meter extension cable designed for use with Bently Nevada 7200 Series 5 mm and 8 mm Proximity Transducer Systems. This component provides the critical signal path between a proximity probe with an integral cable and the Proximitor Sensor. It facilitates the accurate transmission of displacement signals required for shaft vibration and axial position monitoring in industrial rotating machinery.

Features

  • 4.00 meter (157 inch) cable length
  • Non-armored configuration
  • Frequency response: 0 Hz (DC) to 10 kHz
  • Compatible with gap-to-voltage transducer systems
  • Supports measurement of both static and dynamic distances

Applications

This extension cable is utilized in monitoring systems for various rotating and reciprocating machinery, including:

  • Gas and steam turbines
  • Centrifugal and reciprocating compressors
  • Industrial pumps and centrifuges
  • Electric motors and large generators
  • Paper machine and steel mill rollers

Technical Specifications

Model 21747-040-00
Cable Length 4.00 meters (157 inches)
Armor Option Without armor
Operating Temperature -34 degC to +177 degC (-30 degF to +350 degF)
Power Requirements -17.5 Vdc to -26 Vdc at 12 mA
System Compatibility 7200 Series 5mm/8mm Proximity Transducer Systems

Installation Guidelines

  • Ensure the system is powered down before connecting or disconnecting the cable to prevent electrical surges or signal corruption.
  • Verify that the cable connectors are clean and free of debris before mating to ensure signal integrity.
  • Route cables away from high-EMI sources, such as high-voltage power lines or variable frequency drives, to minimize signal interference.
  • Perform a resistance check: Disconnect the cable from the Proximitor and measure the resistance between the center pin and the outer shell to verify circuit continuity.
  • Ensure proper ground isolation; the cable jacket should not have continuity with the machine ground to prevent ground loops.

FAQ

Which transducer systems is the 21747-040-00 compatible with?

The 21747-040-00 is specifically designed for the Bently Nevada 7200 Series 5 mm and 8 mm Proximity Transducer Systems.

Is this cable armored?

No, the 21747-040-00 is an unarmored cable. It is intended for environments where heavy mechanical protection is not required.

How do I verify the cable is functioning correctly?

Use a multimeter to check the resistance between the center pin and the outer shell. Compare the measured value against the manufacturer's specifications for a 4-meter cable to identify potential open circuits or shorts.