The Woodward CSC3HUWC2B2, also cataloged as the CSC3 SEG Controller Module, operates as a dedicated hardware component for multi-channel analog signal processing and discrete switching within engine and turbine automation networks.

Hardware Specifications

Actuator Loop Feedback Response and Thermal Dissipation

The Woodward CSC3HUWC2B2 processes 8 analog input channels (0 to 10 V) and drives 16 digital output channels (24 V) to deliver continuous actuator loop feedback response. Designed to integrate directly into closed-loop speed and fuel governing circuits, the module updates discrete logic states with minimal latency under dynamic load swings. Onboard thermal heat sink dissipation structures maintain internal circuit stability and prevent output signal drift across operating temperatures from -20 to +60 deg C.

Frequently Asked Questions

Q: What are the primary input and output channel capacities of the Woodward CSC3HUWC2B2?

A: The module is equipped with 8 analog input channels accepting 0 to 10 V signals and 16 digital output channels operating at 24 V.

Q: What power supply input voltage is required for module operation?

A: The unit requires a nominal 24 VDC auxiliary power supply input.

Q: What are the physical dimensions and mass of the CSC3HUWC2B2 module?

A: The module measures 120 mm x 100 mm x 60 mm and weighs 1.2 kg.

Field Installation Guidelines

• Mount the module vertically inside a grounded control enclosure to allow natural thermal heat sink dissipation across the rear chassis.
• Connect the 24 VDC main power feed through an external circuit protection fuse, verifying correct terminal polarity prior to energizing.
• Route analog input signal lines (0 to 10 V) through shielded twisted-pair cables, grounding the shield conductor at a single cabinet earth terminal.
• Maintain physical isolation between high-voltage power conduits and 24 V digital output wiring to eliminate electromagnetic interference.